Safety Assessment of Widened Bridges Considering Uneven Multilane Traffic-Load Modeling: Case Study in China
- 1 September 2020
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 25 (9) , 05020008
Abstract
Several bridges now require widening owing to the continuous development of road transport. However, the standard of traffic load in design specifications has been enhanced. Consequently, old bridges may not meet the safety requirements of current design specifications and, therefore, must be reconstructed or retrofitted. However, the old structures in widened bridges carry fast-lane traffic loads, which are relatively low due to uneven multilane traffic loads. This paper reports a case study conducted on a Chinese highway widening project for comprehensively evaluating the structural safety of multislab widened bridges using code-based deterministic and reliability-based probabilistic approaches. In the deterministic evaluation, previous and current Chinese bridge designs and other national codes were employed. Meanwhile, in the probabilistic assessment, an uneven multilane truckload modeling was implemented based on site-specific traffic data. Subsequently, bridge safety under normal traffic conditions with all lanes open and occasional traffic conditions with lane closure was investigated. The results indicate that most old slabs, especially those closer to medial dividers, are unsafe under the current Chinese design specifications. However, a site-specific assessment under normal traffic conditions indicates that these old slabs possess adequate security reserves, except that the side slab close to the junction requires safety. Further analyses conducted with occasional traffic conditions demonstrated that closing fast lanes does not affect the safety of slabs. Conversely, closing slow lanes significantly affects the safety of inner old slabs, which should be prohibited or addressed with strict weight restrictions. These results can be beneficial for future bridge widening projects.Keywords
This publication has 16 references indexed in Scilit:
- Reliability-Based Truck Weight Regulation of Small- to Medium-Span BridgesJournal of Bridge Engineering, 2018
- An improved cellular automaton with axis information for microscopic traffic simulationTransportation Research Part C: Emerging Technologies, 2017
- A site-specific traffic load model for long-span multi-pylon cable-stayed bridgesStructure and Infrastructure Engineering, 2016
- Effect on Bridge Load Effects of Vehicle Transverse In-Lane Position: A Case StudyJournal of Bridge Engineering, 2015
- Numerical simulation of creep and shrinkage in widened concrete bridgesMagazine of Concrete Research, 2014
- Microsimulation Evaluation of Eurocode Load Model for American Long-Span BridgesJournal of Bridge Engineering, 2013
- Lifetime Highway Bridge Traffic Load Effect from a Combination of Traffic States Allowing for Dynamic AmplificationJournal of Bridge Engineering, 2013
- Characteristic Dynamic Increment for extreme traffic loading events on short and medium span highway bridgesEngineering Structures, 2010
- Adjustment of Load and Resistance Factor Design Live Load Factors Using Recent Weigh-in-Motion DataTransportation Research Record: Journal of the Transportation Research Board, 2010
- Crack effect on the elastic buckling behavior of axially and eccentrically loaded columnsSTRUCTURAL ENGINEERING AND MECHANICS, 2006