Microbond fibre bundle pullout technique to evaluate the interfacial adhesion of polyethylene and polypropylene self reinforced composites
Authors:
Open Access
- 23 September 2019
- journal article
- research article
- Published by Springer Nature in Applied Adhesion Science
- Vol. 7 (1) , 1-22
Abstract
Self reinforced polymer composites possess a comparable shear and tensile strength unlike the glass or carbon fibre reinforced composites. Important deciding factors of overall efficiency of composite materials are the interfacial adhesion properties between the fibre and the matrix. Structural properties and processability of composite materials are also dependent on adhesion between the fibre and the matrix. Polypropylene and polyethylene self-reinforced composites are the systems investigated here for the purpose of analyzing the interfacial properties of these systems. Multiple fibre pullout test is an alternate method for single fibre pullout test with added advantages of more reliable statistically averaged data with less standard deviation and minimized chances for fibre breakage during testing. This test can also be verified for various volume fractions unlike single fibre pullout test. Micro bonds of matrix materials are cured on a bundle of fibres and by using a micro vise as an additional fixture, the interfacial strength and other interfacial properties are evaluated through fibre pullout. Surface tension between the fibre and the matrix plays an important role in this test. Thus from the contact angle and the frictional properties of the interface, the interface properties are evaluated. Interface properties obtained from this meso-mechanical semi empirical method are also compared with the properties evaluated from micromechanical formulations. Spectroscopic studies revealed the bonding characteristics during the interface formation and after failure. Fractography reveals the cause and nature of failure and substantiate the analysis.Keywords
Funding Information
- VIT University (School Grant)
This publication has 30 references indexed in Scilit:
- An alternative method of determining the local interfacial shear strength from force–displacement curves in the pull-out and microbond testsInternational Journal of Adhesion and Adhesives, 2014
- Fibre/matrix adhesion of cellulose fibres in PLA, PP and MAPP: A critical review of pull-out test, microbond test and single fibre fragmentation test resultsComposites Part A: Applied Science and Manufacturing, 2014
- Investigation of damage mechanisms in self-reinforced polyethylene composites by acoustic emissionComposites Science and Technology, 2006
- Fiber-stretching test: a new technique for characterizing the fiber–matrix interface using direct observation of crack initiation and propagationJournal of Adhesion Science and Technology, 2000
- Investigation of the micromechanics of the microbond testComposites Science and Technology, 1998
- The local bond strength and its determination by fragmentation and pull-out testsComposites Science and Technology, 1997
- Comparison of surface-chemical methods for characterizing carbon fiber-epoxy resin compositesComposite Interfaces, 1995
- Advances in pull-out testing and data analysisComposites Science and Technology, 1991
- A microbond method for determination of the shear strength of a fiber/resin interfaceComposites Science and Technology, 1987
- A new approach to surface energy characterization for adhesive performance predictionSurface and Interface Analysis, 1981