Steering the Properties of MoOx Hole Transporting Layers in OPVs and OLEDs: Interface Morphology vs. Electronic Structure
Authors:
- Wouter MarchalWMWouter Marchal
- Inge VerbovenIVInge Verboven
- Jurgen KestersJKJurgen Kesters
- Boaz MoeremansBMBoaz Moeremans
- Christopher De DobbelaereCDChristopher De Dobbelaere
- Gilles BonneuxGBGilles Bonneux
- Ken ElenKEKen Elen
- Bert ConingsBCBert Conings
- Wouter MaesWMWouter Maes
- Hans Gerd BoyenHBHans Gerd Boyen
- Wim DefermeWim Deferme
- Marlies Van BaelMarlies Van Bael
Open Access
Abstract
The identification, fine‐tuning, and process optimization of appropriate hole transporting layers (HTLs) for organic solar cells is indispensable for the production of efficient and sustainable functional devices. In this study, the optimization of a solution‐processed molybdenum oxide (MoOx) layer fabricated from a combustion precursor is carried out via the introduction of zirconium and tin additives. The evaluation of the output characteristics of both organic photovoltaic (OPV) and organic light emitting diode (OLED) devices demonstrates the beneficial influence upon the addition of the Zr and Sn ions compared to the generic MoOx precursor. A dopant effect in which the heteroatoms and the molybdenum oxide form a chemical identity with fundamentally different structural properties could not be observed, as the additives do not affect the molybdenum oxide composition or electronic band structure. An improved surface roughness due to a reduced crystallinity was found to be a key parameter leading to the superior performance of the devices employing modified HTLs.Keywords
Funding Information
- Fonds Wetenschappelijk Onderzoek (G041913N)
This publication has 57 references indexed in Scilit:
- Prepare dispersed CIS nano-scale particles and spray coating CIS absorber layers using nano-scale precursorsDiscover Nano, 2014
- Solution Processed MoO3 Interfacial Layer for Organic Photovoltaics Prepared by a Facile Synthesis MethodAdvanced Materials, 2012
- Solution-Processed MoO3 Thin Films As a Hole-Injection Layer for Organic Solar CellsACS Applied Materials & Interfaces, 2011
- Solution-Processed Nanocrystalline TiO2 Buffer Layer Used for Improving the Performance of Organic PhotovoltaicsACS Applied Materials & Interfaces, 2011
- Indium-doped molybdenum oxide as a new p-type transparent conductive oxideJournal of Materials Chemistry, 2011
- Efficient polymer photovoltaic cells using solution-processed MoO3 as anode buffer layerSolar Energy Materials and Solar Cells, 2010
- Conjugated polymers for high-efficiency organic photovoltaicsPolymer Chemistry, 2010
- A Hybrid Inorganic–Organic Semiconductor Light‐Emitting Diode Using ZrO2 as an Electron‐Injection LayerAdvanced Materials, 2009
- Rough electrode surface: effect on charge carrier injection and transport in organic devicesMacromolecular Symposia, 2004
- Fabrication and characterization of n-ZnO/p-AlGaN heterojunction light-emitting diodes on 6H-SiC substratesApplied Physics Letters, 2003