A Comparative Study on the Contact Fatigue Failure Mechanisms of Mn-Cr Series and Cr-Mo Series Gear Steels Based on Surface Integrity and Damage Morphology
Open Access
Abstract
The contact fatigue performance of carburized gear steels is critical for transmission durability, yet the mechanisms linking alloy-specific microstructure to failure modes remain complex. This study systematically compares the contact fatigue behaviors of 20MnCr5 and 20CrMoH gears using step-loading tests and multi-scale characterization. The results demonstrate a significantly higher contact fatigue limit for 20MnCr5 of 1709 ± 12 MPa compared to 1652 ± 40 MPa for 20CrMoH, despite the latter exhibiting higher initial surface hardness. This hardness–toughness paradox is mechanistically elucidated by the distinct roles of alloying elements: while Molybdenum in 20CrMoH refines the grain size for high static strength, it limits retained austenite stability, resulting in a brittle hard-shell and soft-core structure prone to interface decohesion at martensite lath boundaries. Conversely, Manganese in 20MnCr5 promotes a gentler hardness gradient via favorable diffusion kinetics and stabilizes abundant film-like retained austenite. This microstructure activates a Stress Compensation Mechanism, where strain-induced martensitic transformation generates compressive volume expansion to counteract cyclic stress relaxation. Consequently, 20MnCr5 exhibits mild plastic micropitting driven by transformation toughening, whereas 20CrMoH undergoes severe brittle spalling driven by the Eggshell Effect. These findings confirm that balancing matrix toughness with hardness is more critical than maximizing surface hardness alone for contact fatigue resistance.Keywords
Funding Information
- Zhongyuan Talent Program (ZYYCYU202012112)
- Graduate Education Reform Project of Henan Province (2023SJGLX021Y)
- Water Conservancy Equipment and Intelligent Operation and Maintenance Engineering Technology Research Centre in Henan Province (Yukeshi2024-01)
This publication has 38 references indexed in Scilit:
- The Influence of Carburizing‐Nitriding Composite Heat Treatment on the Friction and Wear Properties of 20Cr3MoWVA SteelSteel Research International, 2025
- A numerical model for total contact fatigue life prediction of carburized spur gears considering the surface integrityMeccanica, 2025
- A numerical model for total bending fatigue life estimation of carburized spur gears considering the hardness gradient and residual stressMeccanica, 2024
- Development and application of high strength gearsThe International Journal of Advanced Manufacturing Technology, 2024
- A study of the effect of dual shot peening on the surface integrity of carburized steel: combined experiments with dislocation density-based simulationsArchives of Civil and Mechanical Engineering, 2024
- Influence of tooth profile and surface roughness on wear of spur gears considering temperatureJournal of Mechanical Science and Technology, 2023
- Damage mechanisms and tooth flank load capacity of oil‐lubricated peek gearsJournal of Applied Polymer Science, 2022
- The effect of surface integrity on contact performance of carburized gearJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2021
- Study on contact fatigue of a wind turbine gear pair considering surface roughnessFriction, 2019
- Determination of Multiple Near-Surface Residual Stress Components in Laser Peened Aluminum Alloy via the Contour MethodMetallurgical and Materials Transactions A, 2015