Proposing a sequential iterative method based on a per-unit model for rotor shape optimization in permanent magnet assisted synchronous reluctance motors
Authors:
- 12 April 2022
- journal article
- research article
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. 41 (5) , 1826-1848
Abstract
Purpose: During the design process of synchronous reluctance motors (SynRMs), one crucial step, after its main dimensioning, is optimizing the rotor geometry for maximum average torque and minimum torque ripple. However, because of the complexity of rotor flux-barrier layers geometry, the number of rotor geometrical parameters is high and this step could be quite complex and time-consuming. To obtain a good performance, one needs a robust algorithm to optimize the rotor geometry. The purpose of this paper is to present a sequential iterative method for rotor shape optimization in SynRMs based on the per-unit rotor model to maximize the average torque and minimize the torque ripple. Design/methodology/approach: In the presented method, at first, rotor geometrical parameters are classified into several groups based on their geometrical similarities, and then optimization is done on these individual groups iteratively. The method starts with an arbitrary feasible rotor geometry and proceeds to optimize it. Because the method’s performance depends on initial rotor geometry, different cases are studied to investigate the convergence and robustness of the method. The MATLAB software is used to implement the optimization algorithm, and the ANSYS Maxwell software is used for the finite element analysis. Findings: The performance of the proposed method is studied on a three-phase 0.75 kW-1,500 rpm permanent magnet assisted SynRM. The results show that the method improves the average torque while reducing the torque ripple. Even if the method starts with an inappropriate initial rotor geometry, it is robust enough and converges within an acceptable number of iterations. Originality/value: The value of this paper is in introducing a per-unit rotor model. When the authors optimize the rotor geometry for a specific motor rating, it can be scaled up or down for other ratings with little effort. In this work, the number of rotor poles is four and the number of rotor flux-barrier layers per pole is three. Other combinations could be analyzed in future studies.Keywords
This publication has 13 references indexed in Scilit:
- Computationally Efficient Design and Optimization Approach of PMa-SynRM in Frequent Operating Torque–Speed RangeIEEE Transactions on Energy Conversion, 2018
- Synchronous Reluctance Machine Optimization for High-Speed ApplicationsIEEE Transactions on Energy Conversion, 2018
- Line-Start PM-Assisted Synchronous Motor Design, Optimization, and TestsIEEE Transactions on Industrial Electronics, 2017
- Analysis and design of a high power density permanent magnet-assisted synchronous reluctance machine with low-cost ferrite magnets for EVs/HEVsCOMPEL - The international journal for computation and mathematics in electrical and electronic engineering, 2016
- Design of synchronous reluctance and permanent magnet synchronous reluctance machines for electric vehicle applicationCOMPEL - The international journal for computation and mathematics in electrical and electronic engineering, 2016
- Torque ripple reduction of synchronous reluctance machinesCOMPEL - The international journal for computation and mathematics in electrical and electronic engineering, 2015
- Optimal design of synchronous reluctance machineCOMPEL - The international journal for computation and mathematics in electrical and electronic engineering, 2014
- Design of Synchronous Reluctance Motors With Multiobjective Optimization AlgorithmsIEEE Transactions on Industry Applications, 2014
- Optimum Design Criteria for Maximum Torque Density and Minimum Torque Ripple of SynRM According to the Rated Wattage Using Response Surface MethodologyIEEE Transactions on Magnetics, 2008
- Torque Harmonic Compensation in a Synchronous Reluctance MotorIEEE Transactions on Energy Conversion, 2008