FATIGUE CRACK GROWTH IN DUCTILE MATERIALS UNDER CYCLIC COMPRESSIVE LOADING
Author:
- 1 January 1994
- journal article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 17 (1) , 93-103
Abstract
Abstract— Mode I fatigue crack growth has been studied in notched specimens of 7017‐T651 aluminium alloy subjected to fully compressive cyclic loads. The specimens were first subjected to a deliberate compressive preload which causes plastic deformation at the notch tip. On unloading, this region developed a residual tensile stress field and on subsequent compressive cyclic loading in laboratory air, a fatigue crack was nucleated at the notch and grew at a diminishing rate until it stopped. The final crack length increased with an increase in the value of the initial compressive preload and with an increase in the negative value of the applied cyclic mean load. To gain a better understanding of crack growth in residual stress fields, the magnitude and extent of residual stress induced from compressive preloads have been analysed. This was achieved when extending the notch by cutting while recording the change in the back face strain. From residual strain models it was found that the fatigue crack growth was confined to a region of tensile cyclic stress within the residual stress field. The effective stress intensity range was investigated at selected mean loads and amplitudes, for correlating purposes, using both the compliance technique and by invoking the crack growth rate behaviour of the alloy. Finally, a brief discussion of the fracture morphology of cracks subjected to cyclic compression is presented.Keywords
This publication has 16 references indexed in Scilit:
- Crack initiation under far-field cyclic compression and the study of short fatigue cracksEngineering Fracture Mechanics, 1986
- Crack initiation in cyclic compression and its applicationsEngineering Fracture Mechanics, 1985
- Fatigue crack growth under compressive loadingEngineering Fracture Mechanics, 1985
- Effects of Residual Stresses on the Fatigue of Aluminum Alloy 7017 in Moist Air1984
- FATIGUE IN COMPRESSIONFatigue & Fracture of Engineering Materials & Structures, 1979
- Fatigue cracks at notchesInternational Journal of Mechanical Sciences, 1977
- Crack Growth Under Cyclic CompressionJournal of Basic Engineering, 1969
- Effect of stress ratio on fatigue-crack growth in 7075-T6 aluminum-alloy sheetEngineering Fracture Mechanics, 1969
- Propagation of Fatigue Cracks in Various Sheet MaterialsJournal of Mechanical Engineering Science, 1959
- The propagation of fatigue cracks in sheet specimensJournal of the Mechanics and Physics of Solids, 1958