Effects of quenching and tempering heat treatment on microstructure, mechanical properties, and fatigue crack growth behavior of 51CrV4 spring steel
Authors:
- Chaobin LaiCLChaobin Lai
- Wei HuangWHWei Huang
- Shengci LiShengci Li
- Tao LiuTLTao Liu
- Ruiguo LvRLRuiguo Lv
- Xiaoyong TangXTXiaoyong Tang
- Jianlin YuJYJianlin Yu
Open Access
- 1 September 2021
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 8 (9) , 096514
Abstract
Herein, the microstructure, mechanical properties, and fatigue crack growth (FCG) behavior of 51CrV4 spring steels under different quenching and tempering heat treatment were studied. Results show that tempering temperature would not affect the prior austenite grain (PAG) size, while quenching temperature has a great influence on it; the volume fraction of carbide precipitates decreased with increasing quenching temperature. The width of martensite lath has little relationship with the prior austenite grain size. The mechanical properties of the investigated steels decreased with an increasing tempering temperature. Tempering temperature had a greater influence on the fatigue crack growth behavior compared with quenching temperature. The FCG of all the investigated steels were well interpreted by Paris model. When the quenching temperature was 840 °C, the stable expanding stage of the fatigue fracture was representative fatigue striations, fatigue steps and secondary cracks; multiple failure mechanisms coexisted in the rapid expanding stage; the fracture morphology of unstable failure stage was mainly dimples. When the quenching temperature increased to 880 °C and 920 °C, quasi-cleavage was observed in all the stages compared with the samples quenched at 840 °C. Secondary cracks, fatigue steps and crack closure could retard the FCG rate by consuming the driving force near the tip of fatigue crack.Keywords
Funding Information
- China Postdoctoral Science Foundation (2020T130556)
- Natural Science Foundation of Jiangxi Province (20202BAB214004)
- National Natural Science Foundation of China (51804137)
- Postdoctoral Selection Funding Project of Jiangxi Province (2019KY55)
- Program of Qingjiang Excellent Young Talents,Jiangxi University of Science and Technology (JXUSTQJYX2020011)
This publication has 21 references indexed in Scilit:
- Materials challenges in nuclear energyActa Materialia, 2013
- Oxalate Coprecipitation Process Synthesis of 5 V Cathode Material LiNi0.5Mn1.5O4 and Its PerformanceRare Metal Materials and Engineering, 2010
- Effect of single overloads in ductile metals: A reconsiderationEngineering Fracture Mechanics, 2007
- Fatigue crack growth characteristics in cast Al–Si–Mg alloysMaterials Science and Engineering: A, 2004
- Dislocation Modelling of Fatigue Cracks: An OverviewMATERIALS TRANSACTIONS, 2001
- A crystallographic mechanism for fatigue crack propagation through grain boundariesActa Materialia, 2000
- A study on fatigue crack growth in dual phase martensitic steel in air environmentBulletin of Materials Science, 2000
- Influence of the martensite content on the fatigue behaviour of a dual-phase steelMaterials Science and Engineering, 1987
- The Influence of Metallurgical Structure on the Mechanisms of Fatigue Crack Propagation1967
- A Critical Analysis of Crack Propagation LawsJournal of Basic Engineering, 1963