Revisit of Polypyrrole as Cathode Material for Lithium-Ion Battery
Open Access
- 1 January 2012
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 159 (10) , A1624-A1629
Abstract
Conducting polymer polypyrrole (PPy) was revisited as cathode material for lithium-ion battery. Synthesis condition, microstructure, doping effect and electrochemical performance were systematically investigated. Chemical polymerization was employed to synthesize PPy with sodium p-toluenesulfonate (pTSNa) as anionic dopant. Fe2(SO4)3·xH2O, ammonium persulfate (APS) and FeCl3·6H2O were used as oxidants respectively. The product was carefully characterized by elemental analysis, conductivity measurement, scanning electron microscopy, Fourier transform infrared spectroscopy and electrochemical impedance spectroscopy. Experiments show that the oxidant and the molar ratio of pTSNa to monomer pyrrole (Py) strongly influence the yield, conductivity, composition, structure, morphology and electrochemical performance. As a cathode material, the PPy obtained with Fe2(SO4)3·xH2O as oxidant at [pTSNa]/[Py] = 2.0 exhibits the best performance, which gives a discharge capacity up to 122.5 mAh g−1 at current density of 7.2 mA g−1 and a capacity retention of 89.9% after 600 cycles at 72 mA g−1.Keywords
This publication has 30 references indexed in Scilit:
- Nitrogen‐Doped Porous Carbon Nanofiber Webs as Anodes for Lithium Ion Batteries with a Superhigh Capacity and Rate CapabilityAdvanced Materials, 2012
- SnO2 nanoparticles@polypyrrole nanowires composite as anode materials for rechargeable lithium-ion batteriesJournal of Power Sources, 2011
- Preparation of C-LiFePO4/polypyrrole lithium rechargeable cathode by consecutive potential steps electrodepositionJournal of Power Sources, 2010
- Mesoporous polyaniline or polypyrrole/anatase TiO2 nanocomposite as anode materials for lithium-ion batteriesElectrochimica Acta, 2010
- Electrochemical synthesis of polypyrrole films using stainless steel mesh as substrate for battery applicationSynthetic Metals, 2005
- An investigation of polypyrrole-LiFePO4 composite cathode materials for lithium-ion batteriesElectrochimica Acta, 2005
- Preparation, properties and applications of polypyrrolesReactive and Functional Polymers, 2001
- Charge–discharge properties of composites of LiMn2O4 and polypyrrole as positive electrode materials for 4 V class of rechargeable Li batteriesElectrochimica Acta, 1999
- Performances of lithium/gel electrolyte/polypyrrole secondary batteriesJournal of Power Sources, 1997
- Electrochemically Active Polymers for Rechargeable BatteriesChemical Reviews, 1997