Bone‐bonding ability of a hydroxyapatite coated zirconia–alumina nanocomposite with a microporous surface
- 31 May 2006
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part A
- Vol. 78A (4) , 693-701
Abstract
Using a combination of hydroxyapatite (HA) coating and microporous surface treatment, bone‐bonding ability was given to composites of ceria‐stabilized tetragonal zirconia and alumina (CZA), which possesses excellent mechanical and wear properties and phase stability. Four types of CZA plates (2 × 10 × 15 mm3) were prepared for this study, which were CZA with a polished surface (group 1), a microporous surface prepared by hydrofluoric acid and heat treatment (group 2), a microporous surface with a submicron HA coating prepared by alternately soaking the plate from group 2 in aqueous CaCl2/HCl and Na2HPO4 solutions (group 3), and a microporous surface with a 4‐μm HA coating prepared by the biomimetic method, where the plates from group 3 were soaked in simulated body fluid (group 4). Plates were implanted into rabbit tibia, and after 4, 8, and 16 weeks, tensile testing and histological examination of the bone–implant interface were conducted. At 4 weeks, group 4 had superior bone‐bonding ability compared with other implants, which was maintained at the later postimplantation times. This HA‐coated CZA with a microporous surface has the possibility of clinical use as a bearing material in cementless joint prostheses or as a load‐bearing bone substitute. © 2006 Wiley Periodicals, Inc. J Biomed Mater Res, 2006Keywords
This publication has 30 references indexed in Scilit:
- Biological performance of uncoated and octacalcium phosphate-coated Ti6Al4VBiomaterials, 2005
- Osteointegration of biomimetic apatite coating applied onto dense and porous metal implants in femurs of goatsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2003
- Phase stability after aging and its influence on pin‐on‐disk wear properties of Ce‐TZP/Al2O3 nanocomposite and conventional Y‐TZPJournal of Biomedical Materials Research Part A, 2003
- A comparative study between in vivo bone ingrowth and in vitro apatite formation on Na2O–CaO–SiO2 glassesBiomaterials, 2003
- Hydroxyapatite-coated Ti–6Al–4VBiomaterials, 2002
- Ce‐TZP/Al2O3 nanocomposite as a bearing material in total joint replacementJournal of Biomedical Materials Research, 2002
- Hydroxyapatite Formation on/in Poly(vinyl alcohol) Hydrogel Matrices Using a Novel Alternate Soaking ProcessChemistry Letters, 1998
- Effect of surface topology on the osseointegration of implant materials in trabecular boneJournal of Biomedical Materials Research, 1995
- Four calcium phosphate ceramics as bone substitutes for non-weight-bearingBiomaterials, 1993
- Porous-Coated Uncemented Components in Experimental Total Hip Arthroplasty in DogsClinical Orthopaedics and Related Research, 1992