Fast sodium ionic conduction in Na2B10H10-Na2B12H12 pseudo-binary complex hydride and application to a bulk-type all-solid-state battery
- 6 March 2017
- journal article
- conference paper
- Published by AIP Publishing in Applied Physics Letters
- Vol. 110 (10) , 103901
Abstract
In the present work, we developed highly sodium-ion conductive Na2B10H10-Na2B12H12 pseudo-binary complex hydride via mechanically ball-milling admixtures of the pure Na2B10H10 and Na2B12H12 components. Both of these components show a monoclinic phase at room temperature, but ball-milled mixtures partially stabilized highly ion-conductive, disordered cubic phases, whose fraction and favored structural symmetry (body-centered cubic or face-centered cubic) depended on the conditions of mechanical ball-milling and molar ratio of the component compounds. First-principles molecular-dynamics simulations demonstrated that the total energy of the closo-borane mixtures and pure materials is quite close, helping to explain the observed stabilization of the mixed compounds. The ionic conductivity of the closo-borane mixtures appeared to be correlated with the fraction of the body-centered-cubic phase, exhibiting a maximum at a molar ratio of Na2B10H10:Na2B12H12 = 1:3. A conductivity as high as log(σ/S cm−1) = –3.5 was observed for the above ratio at 303 K, being approximately 2–3 orders of magnitude higher than that of either pure material. A bulk-type all-solid-state sodium-ion battery with a closo-borane-mixture electrolyte, sodium-metal negative-electrode, and TiS2 positive-electrode demonstrated a high specific capacity, close to the theoretical value of NaTiS2 formation and a stable discharge/charge cycling for at least eleven cycles, with a high discharge capacity retention ratio above 91% from the second cycle.Keywords
Funding Information
- Japan Society for the Promotion of Science (16H04513, 16K06766, 25220911)
This publication has 32 references indexed in Scilit:
- The renaissance of hydrides as energy materialsNature Reviews Materials, 2016
- Stable Interface Formation between TiS2 and LiBH4 in Bulk-Type All-Solid-State Lithium BatteriesChemistry of Materials, 2015
- Research Development on Sodium-Ion BatteriesChemical Reviews, 2014
- Development of bulk-type all-solid-state lithium-sulfur battery using LiBH4 electrolyteApplied Physics Letters, 2014
- Complex Hydrides for Electrochemical Energy StorageAdvanced Functional Materials, 2014
- Sodium and magnesium ionic conduction in complex hydridesJournal of Alloys and Compounds, 2013
- Sodium ionic conduction in complex hydrides with [BH4]− and [NH2]− anionsApplied Physics Letters, 2012
- Lithium Fast‐Ionic Conduction in Complex Hydrides: Review and ProspectsAdvanced Energy Materials, 2011
- Lithium superionic conduction in lithium borohydride accompanied by structural transitionApplied Physics Letters, 2007
- Complex Hydrides for Hydrogen StorageChemical Reviews, 2007