The Effects of a Compatibilizer for Improving Mechanical Properties on Polymer Matrix Composites
Authors:
- 1 February 2021
- journal article
- research article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 877, 3-8
Abstract
The effect of compatibilizer agent was studied when adding Aluminum fine powder (Al) to reinforce in Polypropylene (PP) by compared between polymer matrix composites (PMCs) and PMCs added Polypropylene graft maleic anhydride (PP-g-MAH).The average particle size of the aluminum fine powder was around 75 μm filled in polypropylene with different proportions of 2.5, 5, 7.5 and 10wt%. PMCs were prepared using the internal mixer. The results found that when the amount of aluminum fine powder increased, the mechanical properties had changed, i.e., tensile strength, and Young’s Modulus increased, while the impact strength and elongation at break decreased. But, when adding compatibilizer 1wt% it was found that the trend of tensile strength, and Young’s Modulus increased that compared with non-compatibilizer, but the impact strength and elongation at break decreased. The part of the morphology of PMCs with non-compatibilizer was found that the particle of aluminum fine powder dispersed in the matrix phase, but there were many microvoids between filler and matrix. But, PMCs with compatibilizer caused the microvoids between filler and matrix to be reduced.Keywords
This publication has 12 references indexed in Scilit:
- Effect of modified polypropylene on the interfacial bonding of polymer–aluminum laminated filmsMaterials & Design (1980-2015), 2015
- Mechanical and Morphological Properties of Polypropylene/Nanoα-Al2O3CompositesThe Scientific World Journal, 2014
- Synthesis of aluminium nanoparticles in a PP matrix during melt processing: Effect of the alkoxide organic chainReactive and Functional Polymers, 2012
- Morphology of syndiotactic polypropylene/alumina nanocompositesPolymer, 2011
- Properties of polypropylene composites containing aluminum/multi-walled carbon nanotubesComposites Part A: Applied Science and Manufacturing, 2010
- Improvement in mechanical properties of aluminum polypropylene composite fiberFibers and Polymers, 2009
- Properties of Aluminum Filled Polypropylene CompositesPolymers and Polymer Composites, 2006
- Mechanical Properties and Crystallization Behavior of Polypropylene/Nano-SiO2 CompositesJournal of Reinforced Plastics and Composites, 2006
- Mechanical properties and fracture morphology of Al(OH)3/polypropylene composites modified by PP grafting with acrylic acidJournal of Applied Polymer Science, 2001
- Thermal characteristics of silver powder‐filled polypropylene compositesJournal of Applied Polymer Science, 1994