Noise Modulation of a Bandgap Reference by Using a Single Resistor
Open Access
- 24 October 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 73 (3) , 1528-1538
Abstract
This manuscript presents a low noise and area efficient voltage bandgap reference (BGR) where its noise is modulated by using a single resistor between the base terminals of the bipolar core. Depending on the value of the resistor, the flicker noise is modulated above the noise corner frequency (thermal noise). This resistor also provides an extra degree of freedom while selecting the BGR output voltage and the temperature coefficient (TC). After optimizing the design via simulations, the BGR was taped out in standard $\mathbf {1 8 0} \mathbf {n m}$ CMOS TSMC technology. Experimental results are in accordance with simulations, where the BGR provides 0.9 V and occupies an area of only $0.009 \mathrm {mm}^{2}$ . The BGR has a total noise of $14.23 \mu \mathrm {Vrms}$ over the frequency range of 0.1 Hz to 10 kHz and only $2.82~\mu $ Vrms between 0.1Hz and 10 Hz. The average TC is $49.05~\mathrm {ppm} ^{\circ } \mathrm {C}$ between $-20 ^{\circ } \mathrm {C}$ and $90 ^{\circ } \mathrm {C}$ . The total power consumption is $55.8~\mu \mathrm {W}$ at 1.8 V.Keywords
Funding Information
- Crossbrain project (HORIZON-European Innovation Council (EIC)-2021-PATHFINDERCHALLENGES-01-02)
- Crossbrain project (101070908)
This publication has 23 references indexed in Scilit:
- A 2.79 μVrms Noise, 3.6 ppm/°C TC Bandgap Reference for Portable Biopotential Signal Monitoring Systems2024
- A Chopper-Stabilized Bandgap Reference with a Double-Sampled FIR Filter in 180-nm CMOS2024
- A wireless millimetric magnetoelectric implant for the endovascular stimulation of peripheral nervesNature Biomedical Engineering, 2022
- A resistorless low-power voltage reference based on mutual temperature cancellation of VT and VTHInternational Journal of Electronics, 2021
- A 442.1 nVpp, 13.07 ppm/°C Ultra-Low Noise Bandgap Reference Circuit in 180 nm BCD Process2021
- A Novel Low-Noise Bandgap Reference with an Active RC Filter2019
- NanoNeuroRFID: A Wireless Implantable Device Based on Magnetoelectric AntennasIEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology, 2019
- A Low Voltage Low 1/f Noise CMOS Bandgap Reference2005
- Circuit techniques for reducing the effects of op-amp imperfections: autozeroing, correlated double sampling, and chopper stabilizationProceedings of the IEEE, 1996
- Analysis and Design of Analog Integrated CircuitsElectronics and Power, 1978