Saturated hydraulic conductivity model computed from bimodal water retention curves for a range of New Zealand soils
Open Access
- 9 June 2017
- journal article
- Published by Copernicus GmbH in Hydrology and Earth System Sciences
- Vol. 21 (6) , 2725-2737
Abstract
Descriptions of soil hydraulic properties, such as the soil moisture retention curve, θ(h), and saturated hydraulic conductivities, Ks, are a prerequisite for hydrological models. Since the measurement of Ks is expensive, it is frequently derived from statistical pedotransfer functions (PTFs). Because it is usually more difficult to describe Ks than θ(h) from pedotransfer functions, Pollacco et al. (2013) developed a physical unimodal model to compute Ks solely from hydraulic parameters derived from the Kosugi θ(h). This unimodal Ks model, which is based on a unimodal Kosugi soil pore-size distribution, was developed by combining the approach of Hagen–Poiseuille with Darcy's law and by introducing three tortuosity parameters. We report here on (1) the suitability of the Pollacco unimodal Ks model to predict Ks for a range of New Zealand soils from the New Zealand soil database (S-map) and (2) further adaptations to this model to adapt it to dual-porosity structured soils by computing the soil water flux through a continuous function of an improved bimodal pore-size distribution. The improved bimodal Ks model was tested with a New Zealand data set derived from historical measurements of Ks and θ(h) for a range of soils derived from sandstone and siltstone. The Ks data were collected using a small core size of 10 cm diameter, causing large uncertainty in replicate measurements. Predictions of Ks were further improved by distinguishing topsoils from subsoil. Nevertheless, as expected, stratifying the data with soil texture only slightly improved the predictions of the physical Ks models because the Ks model is based on pore-size distribution and the calibrated parameters were obtained within the physically feasible range. The improvements made to the unimodal Ks model by using the new bimodal Ks model are modest when compared to the unimodal model, which is explained by the poor accuracy of measured total porosity. Nevertheless, the new bimodal model provides an acceptable fit to the observed data. The study highlights the importance of improving Ks measurements with larger cores.Keywords
All Related Versions
This publication has 45 references indexed in Scilit:
- Ensemble pedotransfer functions to derive hydraulic properties for New Zealand soilsSoil Research, 2013
- Atypical early-time infiltration into a structured soil near field capacity: The dynamic interplay between sorptivity, hydrophobicity, and air encapsulationGeoderma, 2011
- In situ characterization of hydraulic conductivities of individual soil profile layers during infiltration over long time periodsEuropean Journal of Soil Science, 2010
- Modeling soil hydraulic properties for a wide range of soil conditionsEcological Modelling, 2008
- Soil hydraulic properties near saturation, an improved conductivity modelJournal of Hydrology, 2006
- Predicting the saturated hydraulic conductivity of sand and gravel using effective diameter and void ratioCanadian Geotechnical Journal, 2004
- Methods of Soil Analysis2002
- A Physicoempirical Model to Predict the Soil Moisture Characteristic from Particle‐Size Distribution and Bulk Density DataSoil Science Society of America Journal, 1981
- Relationships Between Saturated Hydraulic Conductivity and Morphometric Data of an Argillic HorizonSoil Science Society of America Journal, 1973
- The permeability of porous materialsProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1950