Highly Repeatable and Recoverable Phototransistors Based on Multifunctional Channels of Photoactive CdS, Fast Charge Transporting ZnO, and Chemically Durable Al2O3 Layers

Authors:

Abstract
Highly repeatable and recoverable phototransistors were explored using a “multi-functional channels” structure with multi-stacked chalcogenide and oxide semiconductors. These devices were made of i) photoactive CdS (with a visible band gap), ii) fast charge transporting ZnO (with a high field-effect mobility), and iii) a protection layer of Al2O3 (with high chemical durability). The CdS TFT without the Al2O3 protection layer did not show a transfer curve due to the chemical damage that occurred on the ZnO layer during the chemical bath deposition (CBD) process used for CdS deposition. Alternatively, compared to CdS phototransistors with long recovery time and high hysteresis (∆Vth=19.5 V), our “multi-functional channels” phototransistors showed an extremely low hysteresis loop (∆Vth=0.5 V) and superior photosensitivity with repeatable high photo-responsivity (52.9 A/W @ 400 nm). These improvements are likely caused by the physical isolation of the sensing region and charge transport region by the insertion of the ultra-thin Al2O3 layer. This approach successfully addresses some of the existing problems in CdS phototransistors, such as the high gate-interface trap site density and high absorption of molecular oxygen, which originate from the polycrystalline CdS.
Funding Information
  • National Research Foundation of Korea (2015R1A2A2A01007409)

This publication has 24 references indexed in Scilit: