Measurement of the longitudinal bunch-shape distribution for a high-intensity negative hydrogen ion beam in the low-energy region
Open Access
- 20 March 2023
- journal article
- research article
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 26 (3) , 032802
Abstract
A bunch-shape monitor (BSM) is a useful device for performing longitudinal beam tuning using the pointwise longitudinal phase distribution measured at selected points in the beam transportation. To measure the longitudinal phase distribution of a low-energy negative hydrogen () ion beam, highly oriented pyrolytic graphite (HOPG) was adopted for the secondary-electron-emission target to mitigate the thermal damage due to the high-intensity beam loading. The HOPG target enabled the measurement of the longitudinal phase distribution at the center of a 3-MeV ion beam with a high peak current of about 50 mA. The longitudinal bunch width was measured using HOPG-BSM at the test stand, which was consistent with the beam simulation. The correlation measurement between the beam transverse and longitudinal planes was demonstrated using HOPG-BSM. The longitudinal Twiss and emittance measurement with the longitudinal Q-scan method was conducted using HOPG-BSM. The measured longitudinal emittance is consistent with the beam simulation using the radio-frequency quadrupole design input.
Keywords
This publication has 15 references indexed in Scilit:
- Longitudinal bunch size measurement using an RF deflectorNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2018
- Diamond Wire Sawing of Solar Silicon Wafers: A Sustainable Manufacturing Alternative to Loose Abrasive Slurry SawingProcedia Manufacturing, 2018
- Novel heatsink for power semiconductor module using high thermal conductivity graphiteMicroelectronics Reliability, 2016
- Beam profile monitor for intense, negative, hydrogen-ion beams in the J-PARC linacJournal of the Korean Physical Society, 2016
- Bunch Shape Measurement of 181 MeV Beam in J-PARC Linac2015
- Particle Accelerator Physics2015
- The development and beam test of an RF chopper system for J-PARCNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2005
- Thermal stability of single and multi-walled carbon nanotubesPhysical Review B, 2005
- An Object-Oriented Parallel Particle-in-Cell Code for Beam Dynamics Simulation in Linear AcceleratorsJournal of Computational Physics, 2000
- Minuit - a system for function minimization and analysis of the parameter errors and correlationsComputer Physics Communications, 1975