Mechanical and surface characterization of interstitial‐free steel corroded under wet‐dry salt spray and immersion conditions: A comparative study
Authors:
- 26 May 2023
- journal article
- research article
- Published by Wiley in Materials and Corrosion
- Vol. 74 (9) , 1289-1300
Abstract
Highly formable interstitial‐free steel has been subjected to corrode in wet‐dry salt spray (WDSS) and immersion corrosion (IMCC) conditions in 5, 10, 20, 30, and 45 days to investigate its corrosion behavior in simulated‐marine environment at the same temperature using 5 wt.% NaCl. The corrosion mechanisms and their effects have been studied and compared on the basis of weight loss and mechanical properties. Results revealed that corrosion rate in WDSS is about 9.5 times higher than IMCC. The corrosion coefficient (n) values for WDSS and IMCC have been observed as 0.99 and 0.35, respectively, which are evident for the protective nature of rust. The corrosion mechanisms and rust constituents may attribute different corrosion kinetics in both conditions. Moreover, the rate of degradation in yield strength and fracture strain in WDSS is 2 and 2.5 times higher than IMCC respectively; however, in the case of ultimate tensile strength the degradation rate is nearly same. It has also been observed that the higher pitting corrosion in WDSS may lead to change the failure mode from ductile to mix‐mode after 30 and 45 days of corrosion as authenticated from scanning electron microscopic images.Keywords
This publication has 42 references indexed in Scilit:
- The atmospheric corrosion kinetics of low carbon steel in a tropical marine environmentCorrosion Science, 2010
- Corrosion of vertical mild steel strips in seawaterCorrosion Science, 2009
- Microstructure and corrosion properties of ultrafine-grained interstitial free steelMaterials Science and Engineering: A, 2007
- Electrochemical reduction of the corrosion products formed on copper surface in alkaline-sulphide solutionsJournal of Alloys and Compounds, 2007
- Comparison of Corrosion Properties of Squeeze Cast and Thixocast MgZnRE AlloysMaterials Science Forum, 2005
- Grain boundary character distribution effects on secondary working embrittlement of interstitial-free steelsScripta Materialia, 2005
- Advances in understanding atmospheric corrosion of iron. II. Mechanistic modelling of wet–dry cyclesCorrosion Science, 2004
- In-depth distribution of rusts on a plain carbon steel and weathering steels exposed to coastal–industrial atmosphere for 17 yearsCorrosion Science, 2003
- Effect of laser surface melting on corrosion and wear resistance of a commercial magnesium alloyMaterials Science and Engineering: A, 2003
- Electrochemical Behavior of Rust Formed on Carbon Steel in a Wet/Dry Environment Containing Chloride IonsCorrosion, 2000