Development of low friction snake-inspired deterministic textured surfaces
- 9 May 2016
- journal article
- Published by IOP Publishing in Surface Topography: Metrology and Properties
- Vol. 4 (2) , 024013
Abstract
The use of surface texturization to reduce friction in sliding interfaces has proved successful in some tribological applications. However, it is still difficult to achieve robust surface texturing with controlled designer-functionalities. This is because the current existing gap between enabling texturization technologies and surface design paradigms. Surface engineering, however, is advanced in natural surface constructs especially within legless reptiles. Many intriguing features facilitate the tribology of such animals so that it is feasible to discover the essence of their surface construction. In this work, we report on the tribological behavior of a novel class of surfaces of which the spatial dimensions of the textural patterns originate from micro-scale features present within the ventral scales of pre-selected snake species. Mask lithography was used to produce implement elliptical texturizing patterns on the surface of titanium alloy (Ti6Al4V) pins. To study the tribological behavior of the texturized pins, pin-on-disc tests were carried out with the pins sliding against ultra-high molecular weight polyethylene discs with no lubrication. For comparison, two non-texturized samples were also tested under the same conditions. The results show the feasibility of the texturization technique based on the coefficient of friction of the textured surfaces to be consistently lower than that of the non-texturized samples.Keywords
This publication has 48 references indexed in Scilit:
- Correlation between standard roughness parameters skewness and kurtosis and tribological behaviour of contact surfacesTribology International, 2012
- Green Tribology2012
- Surface morphology in engineering applications: Influence of roughness on sliding and wear in dry frettingTribology International, 2011
- Green tribology: principles, research areas and challengesPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2010
- Role of Surface Texture, Roughness, and Hardness on Friction During Unidirectional SlidingTribology Letters, 2010
- Influence of surface preparation on roughness parameters, friction and wearWear, 2009
- Economic and ecological issues in tribologyRussian Engineering Research, 2008
- Influence of surface roughness and contact load on friction coefficient and scratch behavior of thermoplastic olefinsApplied Surface Science, 2008
- The effect of counterface roughness on the wear of UHMWPE for rectangular wear pathsWear, 2005
- The statistical correlation of the coefficient of friction and wear rate of PTFE composites with steel counterface roughness and hardnessWear, 2002