Mechanical Performance and Dimensional Stability of Bamboo Fiber-Based Composite
Open Access
Abstract
The bamboo fiber-based composite (BFBC) has high-performce in terms of mechanical properties and dimensional stability. In this study, BFBCs were prepared with different hot-pressing temperatures (150 °C, 160 °C, 170 °C, 180 °C, 190 °C, and 200 °C) and designed with different densities (1.05 g/cm3, 1.10 g/cm3, 1.15 g/cm3 and 1.20 g/cm3), and their selected properties were evaluated. Temperature affected BFBC performance, which, with a general increase in temperature, showed a decrement in mechanical properties and an improvement in dimensional stability. Holocellulose content significantly decreased, and the color of BFBC became darker with the increasing of the press temperature. As the density of BFBC increased, the modulus of elasticity (MOE) significantly increased from 23.09 GPa to 27.01 GPa with the increase in temperature. The thickness swelling ratio (TSR), width swelling ratio (WSR) and water absorption ratio (WAR) declined by more than 30% with the increase in density. Overall, the results of this study provide a theoretical basis and a source of technical support to promote the design, application, and popularization of BFBC in different fields.Keywords
This publication has 35 references indexed in Scilit:
- Comparison of laboratory delignification methods, their selectivity, and impacts on physiochemical characteristics of cellulosic biomassBioresource Technology, 2013
- Development of layered laminate bamboo composite and their mechanical propertiesComposites Part B: Engineering, 2012
- The influence of thermal treatment on color response of wood materialsColor Research & Application, 2010
- Causes of color changes in wood during dryingForest Science and Practice, 2010
- Colour in thermally modified wood of beech, Norway spruce and Scots pine. Part 1: Colour evolution and colour changesHolzforschung, 2009
- Chemical composition changes in eucalyptus and pinus woods submitted to heat treatmentBioresource Technology, 2008
- Effects of steaming process on some properties of eucalyptus particleboard bonded with UF and MUF adhesivesBuilding and Environment, 2007
- Effect of high temperature treatment on the mechanical properties of birch (Betula papyrifera)Wood Science and Technology, 2006
- Some of the properties of particleboard made from paulowniaJournal of Wood Science, 2005
- Wood—chemistry, ultrastructure, reactions, by D. Fengel and G. Wegener, Walter de Gruyter, Berlin and New York, 1984, 613 pp. Price: 245 DMJournal of Polymer Science Part C: Polymer Letters, 1985