Microstructure Characterization of Laser Treated Surfaces

Authors:

Abstract
Excimer laser UV radiation presents a new technology for preadhesion surface treatment of various material adherends. The application of an ArF Excimer laser (193 nm) for surface pretreatment of polycarbonate, polyetherimide, PEEK composite, glass reinforced epoxy composite, aluminum, copper, magnesuim. PZT and fused silica was investigated. Experimental results indicated that UV laser surface treatment improved the adhesional strength significantly compared with conventionally-treated substrates for all the materials tested. The improved adhesion correlated with changes in morphology of the irradiated surface, chemical modification and removal of contaminants, which contributed to a strong and durable adhesive bond. This paper will concentrate only on the connection between the mechanical and morphological effect. The most common microstructure features on the surface after laser irradiation (examined by SEM and AFM) were small conical structures randomly distributed on the irradiated areas. Other features were periodic surface ridges or flat smoothened areas with spread arrays of microcracks. All these morphologies increase the roughness of the surface, enabling mechanical interlocking of the adhesive. It should be noted that the roughness is micronsized, and uniformly spread on the surface, which presents an advantage over abrasive treatments. The distribution of the features and their size were dependent on the laser parameters (intensity and number of pulses). Some mechanisms are presented, and these interesting phenomena are discussed.