Liquid mediated growth and the bimodal microstructure of YBa2Cu3O7−δ films made by the ex situ conversion of physical vapor deposited BaF2 precursors
- 1 May 2005
- journal article
- Published by Springer Nature in Journal of Materials Research
- Vol. 20 (5) , 1216-1233
Abstract
YBa2Cu3Oy (YBCO) films produced by the ex situ conversion of BaF2-based precursors deposited by physical vapor deposition on ion-beam assisted deposited (IBAD) yttrium-stabilized zirconia (YSZ) and rolling-assisted biaxially textured substrates (RABiTS) templates are characterized by a bi-axially aligned, laminar grain structure that results from the anisotropic growth characteristics of the YBCO phase and its precipitation from a transient liquid phase during the conversion process. A bimodal microstructure characterizes these films and is defined by large, well-formed YBCO grains with Y2O3 precipitates in the bottom region of the film and small YBCO grains with a high density of stacking faults in the upper half. Ba2Cu3Oy or Ba–O–F/CuO second phase layers were often found between large YBCO grains in the bottom half of the films. YBCO grain sizes exceeded 50 μm within the plane of the film in some cases. Conversely, discrete secondary phases of Y2Cu2O5, Y2O3, and Ba2Cu3Oy/Ba–O–F could be found among the much smaller YBCO grains in the top portion of the bimodal structure. The dividing line of the bimodal structure was generally at one half of the film thickness, although exceptions to this trend were found. The highest critical current densities (Jc) and best film alignments for a given film thickness were found in samples where the layers of Ba2Cu3Oy or Ba–O–F were minimized or eliminated from the films. Samples quenched after partial conversion show the segregation of CuO to the top region of the film and the lateral growth of large YBCO grains from a precursor mix of Y2Cu2O5 and Ba–O–F. The data demonstrate that transient liquid phases are part of the conversion process of BaF2-based YBCO films. The control of both CuO segregation and the amount of liquid phases generated during the initial stages of phase formation is needed for optimizing the ex situ conversion process for high-Jc coated conductors.Keywords
This publication has 49 references indexed in Scilit:
- Through-thickness superconducting and normal-state transport properties revealed by thinning of thick film ex situ YBa2Cu3O7−x coated conductorsApplied Physics Letters, 2003
- Growth mechanism of YBCO films in metal organic deposition method using trifluoroacetatesIEEE Transactions on Applied Superconductivity, 2003
- Reflection high-energy electron diffraction studies of epitaxial oxide seed-layer growth on rolling-assisted biaxially textured substrate Ni(001): The role of surface structure and chemistryApplied Physics Letters, 2001
- Thermodynamic stability and kinetics of Y–Ba–Cu–O film growth at high rates in atomic and molecular oxygenJournal of Crystal Growth, 2001
- Critical current density of YBa2Cu3O7−δ low-angle grain boundaries in self-fieldApplied Physics Letters, 2001
- High critical current density thick MOD-derived YBCO filmsIEEE Transactions on Applied Superconductivity, 1999
- Cube-textured nickel substrates for high-temperature superconductorsSuperconductor Science and Technology, 1998
- Biaxially aligned YBCO film tapes fabricated by all pulsed laser depositionApplied Superconductivity, 1996
- Evidence for channel conduction in low misorientation angle [001] tilt YBa2Cu3O7−x bicrystal filmsApplied Physics Letters, 1996
- Metalorganic deposition of high-J c Ba2YCu3O7−x thin films from trifluoroacetate precursors onto (100) SrTiO3Journal of Applied Physics, 1990