Micromechanisms of split crack formation in aluminum alloy 5083-O plate under cryogenic temperatures
Authors:
- Xixian LiXLXixian Li
- Fuminori YanagimotoFYFuminori Yanagimoto
- Shohei UranakaSUShohei Uranaka
- Tomoya KawabataTKTomoya Kawabata
Open Access
- 15 June 2026
- journal article
- Published by Springer Nature in Welding in the World
Abstract
Hot-rolled 5083-O aluminum alloy has emerged as a strong candidate for use in storage tanks for liquefied hydrogen (LH₂) marine transport, owing to its performance under extreme cryogenic conditions. This study aims to investigate the micromechanisms and critical conditions for the formation of split cracks in 5083-O aluminum alloy at cryogenic temperatures. Tensile tests on smooth and notched round bar specimens and L–T direction C(T) tests were conducted at 293 K, 223 K, 123 K, and 4 K, while an S–L direction C(T) test was performed at 77 K. The fracture locus at each temperature was obtained by combining the results of notched round bar tests with finite element (FE) analyses. The results showed that the fracture locus of 5083-O is temperature-independent. Among the round bar specimens, split cracks were observed only in those tested at 4 K and in the R1 notched specimen at 123 K. For the C(T) specimens, split cracks occurred only in the 4 K tests. Furthermore, a three-stage model was established for the formation process of split cracks. To calibrate the model for 5083-O, FE analyses were conducted to determine the critical conditions for each stage at various temperatures. The results predicted by the developed model were compared with the C(T) test results at temperatures ranging from 123 to 293 K.Keywords
Funding Information
- China Scholarship Council
- University of Tokyo
This publication has 33 references indexed in Scilit:
- Influence of welding methods on the microstructure of nickel-based weld metal for liquid hydrogen tanksJournal of Materials Science, 2024
- First-Principles study of hydrogen solubility and embrittlement of Cr23C6 in nickel-based alloysComputational Materials Science, 2024
- The role of the grain boundary in the fracture toughness of aluminum bicrystalComputational Materials Science, 2019
- Experimental evaluation of effective surface energy for cleavage microcrack propagation across grain boundary in steelsActa Materialia, 2018
- Effect of second phase particles on grain refinement during equal-channel angular pressing of an Al–Mg–Mn alloyActa Materialia, 2012
- EBSD Study of Delamination Fracture in Al–Li Alloy 2090Experimental Mechanics, 2008
- In situ observation of microfracture processes in an 8090 AlLi alloy plateMaterials Science and Engineering: A, 1993
- Fatigue crack propagation and cryogenic fracture toughness behavior in powder metallurgy aluminum-lithium alloysMetallurgical Transactions A, 1991
- Fracture-toughness behavior of 2090-T83 aluminiumlithium alloy sheet at ambient and cryogenic temperaturesScripta Metallurgica, 1989
- Cryogenic toughness of commercial aluminum-lithium alloys: Role of delamination tougheningMetallurgical Transactions A, 1989