EVALUATION OF OVERALL HEAT TRANSFER RATES BETWEEN BUBBLING FLUIDIZED BEDS AND IMMERSED SURFACES
Authors:
- 1 October 1997
- journal article
- research article
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 162 (1) , 125-149
Abstract
A mechanistic model to evaluate heat transfer rates between the dense phase of gas fluidized beds and immersed surfaces has been recently presented by the authors. This model, denoted Generalized Heterogeneous Model (GHM), is formulated in terms of effective thermal properties for particles and interstitial gas. It has been conceived with the purpose of achieving a generalized formulation accounting simultaneously for conductive, gas convective and radiant effects. The model was previously tested as regards its capability to predict radiative heat transfer rates in beds at high temperature and gas convective contribution in beds of large particles and high operating pressures. It is the principal object of this contribution to evaluate the performance of the GHM for a wide range of particle sizes, covering from The purely conductive regime to the gas convection dominant regime. Also, the main assumptions incorporated in the model are revised and some modifications are introduced, mainly on the basis of the results obtained by Mazza et al. (1997b).Keywords
This publication has 19 references indexed in Scilit:
- On the validity of the addition of independent contributions for evaluating heat transfer rates in gas fluidized bedsPowder Technology, 1997
- Radiation Heat Transfer in Fluidized Beds: A Comparison of Exact and Simplified ApproachesJournal of Heat Transfer, 1994
- Analysis of models for heat transfer between gas-fluidized beds andimmersed surfaces at high temperaturesPowder Technology, 1993
- Evaluation of radiative heat transfer properties in dense particulate mediaPowder Technology, 1991
- Fluidization and heat-transfer characteristics around a horizontal heated circular cylinder immersed in a gas fluidized bedInternational Journal of Heat and Mass Transfer, 1988
- Modelling of heat transfer between a slugging fluidized bed and immersed vertical probesPowder Technology, 1985
- Heat transfer between gas fluidized beds of solid particles and the surfaces of immersed heat exchanger elements, Part IIChemical Engineering and Processing - Process Intensification, 1984
- Heat transfer between gas fluidized beds of solid particles and the surfaces of immersed heat exchanger elements, part IChemical Engineering and Processing - Process Intensification, 1984
- Heat transfer in large particle fluidized bedsInternational Journal of Heat and Mass Transfer, 1983
- Local Heat Transfer Coefficients around Horizontal Tubes in Fluidized BedsJournal of Heat Transfer, 1980