Laser synthesizing NiAl intermetallic and TiC reinforced NiAl intermetallic matrix composite
Authors:
- 1 August 2004
- journal article
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 16 (3) , 160-166
Abstract
The NiAl intermetallic layers and NiAl matrix composite layers with TiC particulate reinforcement were successfully synthesized by laser cladding with coaxial powder feeding of Ni/Al clad powder and Ni/Al+TiC powder mixture, respectively. With optimized processing parameters and powder mixture compositions, the synthesized layers were free of cracks and metallurgical bond with the substrate. The microstructure of the laser-synthesized layers was composed of β-NiAl phase and a few γ phases for NiAl intermetallic; unmelted TiC, dispersive fine precipitated TiC particles and refined β-NiAl phase matrix for TiC reinforced NiAl intermetallic composite. The average microhardness was 355 HV0.1 and 538 HV0.1, respectively. Laser synthesizing and direct metal depositing offer promising approaches for producing NiAl intermetallic and TiC-reinforced NiAl metal matrix composite coatings and for fabricating NiAl intermetallic bulk structure.Keywords
This publication has 10 references indexed in Scilit:
- Optimization of toughness and strength in multiphase intermetallicsIntermetallics, 2001
- Multiphase intermetallic alloys for structural applicationsIntermetallics, 2000
- Plasticity in multiphase intermetallicsIntermetallics, 2000
- Emerging applications of intermetallicsIntermetallics, 2000
- Brittle-to-ductile transition of a multiphase intermetallic alloy based on NiAlIntermetallics, 2000
- Mechanical properties of high purity single crystal NiAlIntermetallics, 1999
- Impact resistance of NiAl alloysMaterials Science and Engineering: A, 1997
- Ordered intermetallic alloys: an assessmentIntermetallics, 1997
- Fracture and deformation of NiAl single crystalsMaterials Science and Engineering: A, 1995
- Elevated temperature slow plastic deformation of NiAl-TiB2 particulate composites at 1200 and 1300KJournal of Materials Science, 1990