Thermal insulation and setting property of inorganic solidified foam
Authors:
- 1 June 2015
- journal article
- Published by Emerald Publishing in Advances in Cement Research
- Vol. 27 (6) , 352-363
Abstract
Thermal insulation and setting properties are considered to be two significant parameters when inorganic solidified foam (ISF) is applied to control and extinguish coal fires. Based on studies concerning the thermal properties of porous media and experimental research on the relationship between porosity and the addition of aqueous foam, an equation describing the change in thermal conductivity with aqueous foam volume is deduced and then amended. Microscopic analysis of the process of setting is conducted by scanning electron microscopy. The results show that the coagulation of a single bubble wall and bubbles connecting with each other lead the ISF to lose fluidity gradually. A loss of fluidity time (LFT) index is then proposed on the basis of field process requirements and the aforementioned microscopic analysis, and a home-made instrument to test LFT is developed. Effects of aqueous foam volume and accelerator type, along with its addition quantity, on the LFT of ISF are investigated. The relationship equation provides a theoretical foundation for steerable adjustment of the LFT. Furthermore, under the restriction of cost, thermal conductivity threshold and LFT, the parameters of the feasible construction state areas of four different accelerators were compared; in this study AC3 was found to be the most appropriate accelerator.Keywords
This publication has 21 references indexed in Scilit:
- A new US procedure to determine setting period of cement pastes, mortars, and concretesCement and Concrete Research, 2013
- Gas emissions, minerals, and tars associated with three coal fires, Powder River Basin, USAScience of The Total Environment, 2012
- High porosity (> 90%) cementitious foamsCement and Concrete Research, 2010
- Numerical investigation of conductive heat transfer in high-porosity foamsActa Materialia, 2009
- Rheology of foamed cementCement and Concrete Research, 2009
- A case history: Effect of moisture on the setting behaviour of a Portland cement reacting with an alkali-free acceleratorCement and Concrete Research, 2007
- Clay-based heat insulator composites: Thermal and water retention propertiesApplied Clay Science, 2007
- Direct Simulation of Transport in Open-Cell Metal FoamJournal of Heat Transfer, 2006
- A Variational Approach to the Theory of the Effective Magnetic Permeability of Multiphase MaterialsJournal of Applied Physics, 1962
- The Electrical Resistance of Binary Metallic MixturesJournal of Applied Physics, 1952