Enhancement of Thiourea Leaching Performance of Refractory Silver Tailings by Mechanical Activation
Author:
Preprint
- 30 April 2026
- preprint
- Published by Springer Nature in Research Square
Abstract
Refractory silver tailings are both an environmental liability and a potential secondary resource for precious metals. However, strong mineralogical locking of silver-bearing phases within barite and aluminosilicate matrices severely limits silver recovery under conventional leaching conditions. In this study, mechanical activation was investigated as a pretreatment method to enhance the thiourea leaching performance of refractory silver tailings from the Kütahya Eti Silver Plant (Turkey). Mechanical activation was carried out in a planetary ball mill for 0, 30, 60, and 90 min. The resulting changes in particle size, specific surface area, and structure were evaluated by particle size analysis, BET, XRD, and SEM. Mechanical activation caused marked particle fragmentation, increased surface area, and partial amorphization, indicating enhanced structural disorder and improved accessibility of silver-bearing phases. Thiourea leaching experiments were performed in acidic solution (pH 1.5) with Fe³⁺ as the oxidizing agent. Mechanical activation significantly improved silver dissolution, increasing recovery from about 68% for the non-activated sample to about 96% for the sample activated for 90 min at 50°C. Kinetic analysis under conditions minimizing external mass-transfer resistance showed that apparent rate constants increased with activation time, while the apparent activation energy decreased from 46.1 to 38.9 kJ·mol⁻¹. Post-leaching SEM and BET results revealed agglomerated and porous particle structures, indicating that diffusion through evolving porous particle assemblies contributes to the observed kinetic behavior. This work directly links mechanochemically induced structural evolution with apparent leaching kinetics in industrial refractory silver tailings and highlights mechanically assisted thiourea leaching as a promising cyanide-free alternative for refractory silver-bearing wastes.Keywords
All Related Versions
- Version 1, 2026-04-30, Research Square
- Published version: Scientific Reports, 16 (1).
This publication has 39 references indexed in Scilit:
- The effect of cupola furnace iron slag on the physical and mechanical properties of alkali-activated fly ash-based mortarsJournal of the Australian Ceramic Society, 2025
- Fluid-Solid Reactions2020
- Mineralogical characterization of mine wasteApplied Geochemistry, 2015
- Mine tailings dams: Characteristics, failure, environmental impacts, and remediationApplied Geochemistry, 2014
- Improved gold and silver extraction from a refractory antimony ore by pretreatment with alkaline sulphide leachHydrometallurgy, 2011
- Introduction to Mine Wastes2010
- Mechanochemistry in Nanoscience and Minerals Engineering2008
- Mechano-chemical leaching in hydrometallurgy of complex sulphidesHydrometallurgy, 2006
- Thiourea leaching of silver from mechanically activated tetrahedriteHydrometallurgy, 1996
- Silver extraction from a refractory type ore by thiourea leachingHydrometallurgy, 1993