Mechanical Properties of Concrete Pipes with Pre-Existing Cracks
Open Access
- 24 February 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (4) , 1545
Abstract
Concrete pipes are the most widely used municipal drainage pipes in China. When concrete pipes fall into years of disrepair, numerous problems appear. As one of the most common problems of concrete pipes, cracks impact on the deterioration of mechanical properties of pipes, which cannot be ignored. In the current work, normal concrete pipes and those with pre-existing cracks are tested on a full scale under an external compressive load. The effects of the length, depth, and location of cracks on the bearing capacity and mechanical properties of the concrete pipes are quantitatively analyzed. Based on the full-scale tests, three-dimensional finite element models of normal and cracked concrete pipes are developed, and the measured results are compared with the data of the finite element analysis. It is clear that the test measurements are in good agreement with the simulation results; the bearing capacity of a concrete pipe is inversely proportional to the length and depth of the crack, and the maximum circumferential strain of the pipe occurs at the location of the crack. The strain of the concrete pipe also reveals three stages of elasticity, plasticity, and failure as the external load rises. Finally, when the load series reaches the limit of the failure load of the concrete pipe with pre-existing cracks, the pipe breaks along the crack position.Keywords
Funding Information
- National Key Research and Development Program of China (No. 2016YFC0802400)
This publication has 19 references indexed in Scilit:
- Field performance of large section concrete pipes cracking during jacking in Chongqing – A case studyTunnelling and Underground Space Technology, 2018
- Cracks analysis in the reinforced concrete pipesThe Baltic Journal of Road and Bridge Engineering, 2017
- Equation to predict maximum pipe stress incorporating internal and external loadings on buried pipesCanadian Geotechnical Journal, 2016
- Changes in strength parameters of pipelines rehabilitated with close-fit Trolining liners – Numerical analysis based on laboratory testsArchives of Civil and Mechanical Engineering, 2016
- Structural performance of buried prestressed concrete cylinder pipes with harnessed joints interaction using numerical modelingTunnelling and Underground Space Technology, 2016
- Full-scale physical testing of a buried reinforced concrete pipe under axle loadCanadian Geotechnical Journal, 2014
- Ductile crack growth and constraint in pipelines subject to combined loadingsEngineering Fracture Mechanics, 2011
- Development of a reference strain approach for assessment of fracture response of reeled pipelinesEngineering Fracture Mechanics, 2010
- Avaliação da confiabilidade de tubos de concreto armado no estado limite de fissuraçãoRevista IBRACON de Estruturas e Materiais, 2008
- Fracture response of pipelines subjected to large plastic deformation under tensionInternational Journal of Pressure Vessels and Piping, 2004