High-Performance Energy Selective Surface Based on the Double-Resonance Concept
- 30 April 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 69 (11) , 7658-7666
Abstract
In this article, a high-performance energy selective surface (ESS) is proposed based on a double-resonance concept, which has a nonlinear transmission response for high-power electromagnetic protection. With well-designed grid and cross patterns as well as properly chosen p-i-n diodes, bandpass and band-stop resonances are excited by the ESS at the same frequency under low and high incident power levels, respectively, resulting in low insertion loss (IL) and high shielding effectiveness (SE) of the ESS. Two samples of single-layer and double-layer ESSs operating at 3 GHz are designed to demonstrate the double-resonance concept. By utilizing a double-layer structure, a second-order band-stop resonance is produced to achieve a broader bandwidth with high SE in comparison with the single-layer ESS. Equivalent circuit models are employed to explain how the double resonances are produced and a wide bandwidth of high SE is obtained. Field circuit cosimulation is conducted to estimate the nonlinear performance of the ESS designs. Moreover, the ESS designs are measured in a rectangular waveguide setup. Good agreement is observed between the simulation and measurement. Simulated and measured results demonstrate that low IL less than 1 dB and high SE larger than 24 dB can be obtained under low and high incident power levels, respectively.Keywords
This publication has 25 references indexed in Scilit:
- High-Power Transistor-Based Tunable and Switchable Metasurface AbsorberIEEE Transactions on Microwave Theory and Techniques, 2017
- Multiband High-Order Bandstop 3-D Frequency-Selective StructuresIEEE Transactions on Antennas and Propagation, 2016
- Wavevector Selective Metasurfaces and Tunnel Vision FiltersLight: Science & Applications, 2015
- A Method of Designing a Field-Controlled Active Frequency Selective SurfaceIEEE Antennas and Wireless Propagation Letters, 2014
- A Hybrid PEEC–SPICE Method for Time-Domain Simulation of Mixed Nonlinear Circuits and Electromagnetic ProblemsIEEE Transactions on Electromagnetic Compatibility, 2014
- Classification of Intentional Electromagnetic Environments (IEME)IEEE Transactions on Electromagnetic Compatibility, 2004
- SPICE modeling of microwave and RF control diodes2002
- Frequency-selective surface for microwave power transmissionIEEE Transactions on Microwave Theory and Techniques, 1999
- Magnetism from conductors and enhanced nonlinear phenomenaIEEE Transactions on Microwave Theory and Techniques, 1999
- Microwave Semiconductor Engineering1982