Comparison of four methods for determining fiber content of carbon fiber/epoxy composites
Authors:
- 6 January 2016
- journal article
- research article
- Published by Taylor & Francis in International Journal of Polymer Analysis and Characterization
- Vol. 21 (3) , 251-258
Abstract
The most fundamental parameter that controls the properties of fiber/epoxy composites is fiber content. Thus, exact calculation of carbon fiber content is important for product quality control and process optimization. In this study, four methods for calculating fiber content of continuous carbon fiber/epoxy composites were investigated. These four methods are processing statistical (PS), optical microscopy (OM), thermogravimetric analysis (TGA), and carbonization-in-nitrogen (CIN). The results show that the CIN and PS methods have high repeatability with no more than 4.7 wt.% deviation, and a relatively exact estimation of fiber content can be obtained by using both of them. A larger difference was generated when the TGA and OM methods were used to determine the fiber content. This is because the small amount of samples required by these methods is not sufficiently representative of the whole carbon fiber composite structure. The PS and CIN methods can be used as approved ways to calculate fiber content of carbon fiber/epoxy composites effectively.Keywords
This publication has 18 references indexed in Scilit:
- Development of a carbonization-in-nitrogen method for measuring the fiber content of carbon fiber reinforced thermoset compositesComposites Part A: Applied Science and Manufacturing, 2015
- Effects of mean stress and fibre volume content on the fatigue-induced damage mechanisms in CFRPInternational Journal of Fatigue, 2015
- Dynamic Mechanical Properties of Activated Carbon–Filled Epoxy NanocompositesInternational Journal of Polymer Analysis and Characterization, 2013
- Moisture absorption by epoxy/montmorillonite nanocompositeComposites Science and Technology, 2009
- Preparation of polypropylene fiber/banana fiber composites by novel commingling methodPolymer Composites, 2009
- Structural NanocompositesScience, 2008
- Thermal stability and degradation kinetics of novel organic/inorganic epoxy hybrid containing nitrogen/silicon/phosphorus by sol–gel methodThermochimica Acta, 2007
- The effect of surface treatment on the performance improvement of carbon fiber/polybenzoxazine compositesJournal of Materials Science, 2000
- Effect of fibre content on the interlaminar fracture toughness of unidirectional glass-fibre/polyamide compositeComposites Part A: Applied Science and Manufacturing, 1999
- A TGA technique for determining graphite fiber content in epoxy compositesThermochimica Acta, 1996