Investigation of the Vibration Features and Dynamic Load Sharing Characteristics of Concentric Face Gear Torque Split Transmission
Authors:
- 25 May 2021
- journal article
- research article
- Published by ASME International in Journal of Computational and Nonlinear Dynamics
- Vol. 16 (7)
Abstract
A concentric face gear torque split system used in the helicopter main transmission to transfer more power and reduce the structure weight is introduced. A mathematical model is proposed to analyze the vibration characteristics as well as load sharing performances of the torque split system. The excitations including mesh stiffness, backlash, static transmission error, and system work torque are considered in the model. The vibration property, dynamic displacement responses, and the system factors which affect the load sharing capacity of the system are studied based on the numerical analysis results. The results show that vibration forms of the system can be classified into three categories: pinion vibration mode, face gear vibration mode, and pinion coupled face gear mode. Resonance peaks and jump phenomena are detected around rotation speed 5772 rpm and 10,250 rpm, mainly related to the coupled translational–rotational–axial of face gears vibration modes. In addition, appropriate gear pair backlash and pinion distribution angle parameters are significant to improve the dynamic load sharing capacity. The increase of the pinion bearings' supporting stiffness will generate worse load sharing characteristics and a relative flexible bearing is recommended to the pinions' supporting.Keywords
Funding Information
- China Scholarship Council (No.202006370208)
- National Key Research and Development Program of China (No. 2020YFB2008200)
- National Natural Science Foundation of China (No.52005515)
This publication has 27 references indexed in Scilit:
- Nonlinear dynamic characteristic of a face gear drive with effect of modificationMeccanica, 2014
- The principle of profile modified face-gear grinding based on disk wheelMechanism and Machine Theory, 2013
- Effects of directional rotation radius and transmission error on the dynamic characteristics of face gear transmission systemProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2013
- Effect of Mesh Stiffness on the Dynamic Response of Face Gear Transmission SystemJournal of Mechanical Design, 2013
- Loaded multi-tooth contact analysis and calculation for contact stress of face-gear drive with spur involute pinionJournal of Central South University, 2013
- Evaluation of the Effect of Misalignment and Profile Modification in Face Gear Drive by a Finite Element Meshing SimulationJournal of Mechanical Design, 2004
- Design, generation, and stress analysis of two versions of geometry of face-gear drivesMechanism and Machine Theory, 2002
- Tooth contact analysis of face-gear drivesInternational Journal of Mechanical Sciences, 2000
- Application of Face-Gear Drives in Helicopter TransmissionsJournal of Mechanical Design, 1994
- Design and Geometry of Face-Gear DrivesJournal of Mechanical Design, 1992