Mechanical and Morphological Characteristics of Nickel, Chromium and Nitride-Based Coatings Formed via Electrodeposition and Magnetron Sputtering Techniques on Mild Steel. An Overview
Authors:
- Jahanzeb BhattiJBJahanzeb Bhatti
- Quazi MmQMQuazi Mm
- Bashir MnBMBashir Mn
- Rizwan MRMRizwan M
- Abdul Rauf JamaliAJAbdul Rauf Jamali
Open Access
- 22 September 2023
- journal article
- Published by Austin Publishing Group in Austin Chemical Engineering
- Vol. 10 (3)
Abstract
Mild Steel (MS) is considered as the most widely employed engineering material, which is primarily being used in an automotive industry. Several parts including fuel system, outer and body panel, trims, chassis exhaust, along with many other parts are made up of MS. The driving force behind versatility of MS is its unique set of characteristics. However, the issues arise when its tribological degradation occur that creating problems in service conditions. The best solution for this problem is to coat the mild steel with transition metal-based nitride coatings such as, Ni and Cr. Insufficient Literature is available related to the mechanical performance of single/gradient layer (Ni, Cr) N ternary coating on mild steel substrate. Current review focuses on the characteristics of the coatings that are deposited through two different deposition techniques; electrodeposition and magnetron sputtering. The studied coatings materials are nitrides of nickel and chromium, deposited in several layers. Furthermore, the structural and mechanical properties of these coatings have been compared.Keywords
This publication has 104 references indexed in Scilit:
- Evaluation of corrosion protection performance and mechanical properties of epoxy-triazole/graphene oxide nanocomposite coatings on mild steelJournal of Materials Science, 2021
- A review on the mechanical methods for evaluating coating adhesionActa Mechanica, 2013
- The Science and Engineering of Thermal Spray Coatings2008
- Materials and Surface Engineering in Tribology2008
- Characterization of reactive magnetron sputtered nanocrystalline titanium nitride (TiN) thin films with brush plated Ni interlayerJournal of Applied Electrochemistry, 2007
- Refractory ceramic coatings: processes, systems and wettability/adhesionSurface and Interface Analysis, 2001
- Evaluation of PVD nitride coatings, using impact, scratch and Rockwell-C adhesion testsThin Solid Films, 1995
- Preparation and properties of WC-TiC-TiN gradient coatingsSurface and Coatings Technology, 1988
- Adhesion, friction and wear of thin hard coatingsWear, 1984
- Scratch adhesion testing of hard coatingsThin Solid Films, 1983