A Mixer-First Receiver With Enhanced Matching Bandwidth by Using Baseband Reactance-Canceling LNA
- 3 June 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Letters
- Vol. 4, 109-112
Abstract
A mixer-first receiver (RX) with enhanced matching bandwidth (BW) is proposed. The enhanced matching BW is achieved by exploiting the input reactance (negative capacitance) exhibited in resistive feedback voltage-voltage low noise amplifiers (LNA), to create a second order baseband impedance without any power or noise penalty. The technique is analyzed based on a linear time invariant (LTI) model. An integrated 8-phase mixer-first RX prototype was fabricated in TSMC 65nm CMOS process as a proof of concept. The receiver is capable of broadband operation and achieves wideband <-10 dB matching of 40 MHz, with 36 dB RX gain, noise figure (NF) of 2.2-4.2 dB, B1dB of 14.5 dBm, out of band (OOB) IIP3 of 33 dBm and 1 dB NF degradation for 5 dBm blocker power, at frequency range of 0.5-2 GHz.Keywords
This publication has 6 references indexed in Scilit:
- Breaking the Performance Tradeoffs in N-Path Mixer-First Receivers Using a Second-Order Baseband Noise-Canceling TIAIEEE Journal of Solid-State Circuits, 2020
- Design and Analysis of Enhanced Mixer-First Receivers Achieving 40-dB/decade RF SelectivityIEEE Journal of Solid-State Circuits, 2019
- Circuit Techniques for Enhanced Channel Selectivity in Passive Mixer-First Receivers2018
- Enhanced-Selectivity High-Linearity Low-Noise Mixer-First Receiver With Complex Pole Pair Due to Capacitive Positive FeedbackIEEE Journal of Solid-State Circuits, 2018
- A Passive Mixer-First Receiver With Digitally Controlled and Widely Tunable RF InterfaceIEEE Journal of Solid-State Circuits, 2010
- Cognitive Radio Design Challenges and TechniquesIEEE Journal of Solid-State Circuits, 2010