Pipe Spatter Detection and Grinding Robot
Open Access
- 31 October 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (21) , 11045
Abstract
This paper proposes a robotic system that automatically identifies and removes spatters generated while removing the back-bead left after the electric resistance welding of the outer and inner surfaces during pipe production. Traditionally, to remove internal spatters on the front and rear of small pipes with diameters of 18–25 cm and lengths of up to 12 m, first, the spatter locations (direction and length) are determined using a camera that is inserted into the pipe, and then a manual grinder is introduced up to the point where spatters were detected. To optimize this process, the proposed robotic system automatically detects spatters by analyzing the images from a front camera and removes them, using a grinder module, based on the spatter location and the circumferential coordinates provided by the detection step. The proposed robot can save work time by reducing the required manual work from two points (the front and back of the pipe) to a single point. Image recognition enables the detection of spatters with sizes between 0.1 and 10 cm with 94% accuracy. The internal average roughness, Ra, of the pipe was confirmed to be 1 µm or less after the spatters were finally removed.Keywords
This publication has 18 references indexed in Scilit:
- Pipeline Inspection Tests Using a Biomimetic RobotBiomimetics, 2021
- System Design and Monitoring Method of Robot Grinding for Friction Stir Weld SeamApplied Sciences, 2020
- A Robotic Grinding Motion Planning Methodology for a Novel Automatic Seam Bead Grinding Robot ManipulatorIEEE Access, 2020
- In-process virtual verification of weld seam removal in robotic abrasive belt grinding process using deep learningRobotics and Computer-Integrated Manufacturing, 2019
- A wheel-type in-pipe robot for grinding weld beadsAdvances in Manufacturing, 2017
- Development of Pipe Cleaning Robot for the Industry Pipe FacilityJournal of Korea Robotics Society, 2017
- Development of in-pipe robots for inspection and cleaning tasksInternational Journal of Intelligent Unmanned Systems, 2016
- A Study on Edge Detection using Gray-Level Transformation FunctionThe Journal of the Korean Institute of Information and Communication Engineering, 2015
- A nonlinear laplace operator as edge detector in noisy imagesComputer Vision, Graphics, and Image Processing, 1989
- A Computational Approach to Edge DetectionIEEE Transactions on Pattern Analysis and Machine Intelligence, 1986