Microseismic monitoring using a fiber-optic distributed acoustic sensor array
- 14 April 2020
- journal article
- research article
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 85 (3) , KS89-KS99
Abstract
We have developed a case study demonstrating the use of an “L”-shaped downhole fiber-optic array to monitor microseismicity. We use a relatively simple method to detect events from continuous waveform data, and develop a workflow for manual event location. Locations are defined with a cylindrical coordinate system, with the horizontal axis of the distributed acoustic sensing (DAS) cable being the axis of symmetry. Events are located using three manual “picks,” constraining (1) the zero-offset “broadside” channel to the event, (2) the P-S-wave arrival time difference at the broadside channel, and (3) the angle θ of the event from the array. Because the 1C DAS array is unable to record P-wave energy on the broadside channel, the P-wave pick is made indirectly by ensuring that the modeled P- and S-wave moveout curves match the observed data. The θ angle requires that signal is observed on the vertical part of the array; in our case, this is possible because an engineered fiber, rather than standard telecommunications fiber, provided a significant reduction in the noise level. Because only three picks need to be made, our manual approach is significantly more efficient than equivalent manual processing of downhole geophone data, in which picks for P- and S-waves must be made for each receiver. We find that the located events define a tight cluster around the injection interval, indicating that this approach provides relatively precise and accurate event locations. A surface microseismic array was also used at this site, which detected significantly fewer events, the locations of which had significantly greater scatter than the DAS array locations. We conclude by examining some other aspects of the DAS microseismic data, including the presence of multiple events within very short time windows, and the presence of converted phases that appear to represent scattering of energy from the hydraulic fractures themselves.Keywords
Funding Information
- Natural Environment Research Council (NE/R014531/1)
This publication has 28 references indexed in Scilit:
- Imaging hydraulic fractures by microseismic migration for downhole monitoring systemPhysics of the Earth and Planetary Interiors, 2016
- Poroelastic stress triggering of the December 2013 Crooked Lake, Alberta, induced seismicity sequenceGeophysical Research Letters, 2016
- Field testing of modular borehole monitoring with simultaneous distributed acoustic sensing and geophone vertical seismic profiles at Citronelle, AlabamaGeophysical Prospecting, 2015
- Waveform inversion in triclinic anisotropic media—a resolution studyGeophysical Journal International, 2015
- Distributed acoustic sensing for reservoir monitoring with vertical seismic profilingGeophysical Prospecting, 2014
- Testing the ability of surface arrays to monitor microseismic activityGeophysical Prospecting, 2010
- Improved microseismic event location by inclusion of a priori dip particle motion: a case study from EkofiskGeophysical Prospecting, 2010
- Automated seismic event location for hydrocarbon reservoirsComputers & Geosciences, 2003
- Robust automatic P-phase picking: an on-line implementation in the analysis of broadband seismogram recordingsPhysics of the Earth and Planetary Interiors, 1999
- 3-D traveltime computation using the fast marching methodGeophysics, 1999