Viscous Flow as the Driving Force for the Densification of Low‐Temperature Co‐Fired Ceramics

Authors:

Abstract
Filled glass–ceramic composites, like low‐temperature co‐fired ceramics (LTCC), must densify at temperatures 2O3–B2O3–SiO2glass dependent on temperature, by investigation of the wetting behavior of the glass on the ceramic filler mullite, and of the microstructural development. It was found that the glass does not wet the filler material in a temperature range up to 1000°C. Therefore, liquid‐phase sintering can be excluded. Independent of any wetting effect and therefore in the absence of capillary forces, densification starts at a temperature of 750°C, which corresponds to a viscosity of 109.5dPa·s. This densification can be attributed to viscous flow of the glass matrix composite.

This publication has 15 references indexed in Scilit: