Vortex‐Settling Basin Design Considerations
Authors:
- 1 February 1991
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 117 (2) , 172-189
Abstract
The vortex‐settling basin (VSB) is a fluidic device that uses only the vortices of the flow to remove sediment. This is an economical, efficient, and water‐conserving alternative to the other available sediment‐extraction devices. This paper presents guidelines for designing and modeling VSBs. It shows that the circular basin should have diameter equal to five times (as compared with six times stipulated in American practice) the bed width of inlet canal. The distinctive features of the proposed design are formation of free vortex in the outer region and flow in the basin traversing a relatively longer path before reaching the overflow weir. Extraction of sediment smaller than 0.5 mm is optimized when a diaphragm and a deflector are incorporated in the inlet canal and basin, respectively. Diameter of the flushing pipe and the flushing discharge to be adopted for the extraction of different sediment fractions are specified. Formulas suggested for prediction of trapping efficiency are simpler and more relia...Keywords
This publication has 3 references indexed in Scilit:
- Concentration of very fine silts in a steady vortexJournal of Hydraulic Research, 1986
- Improvement of Swirl ConcentratorJournal of the Environmental Engineering Division, 1982
- Turbulent Flow In A VortexJournal of Hydraulic Research, 1969