Cost performance of encapsulated phase change material-based thermal energy storage systems
Authors:
Open Access
- 8 February 2022
- journal article
- research article
- Published by Oxford University Press (OUP) in International Journal of Low-Carbon Technologies
- Vol. 17, 1353-1365
Abstract
The cost of thermal storage is crucial to the economic viability of concentrated solar power plants. The aim of this study was to investigate ways to reduce the cost of latent heat thermal energy storage systems, in particular encapsulated phase change material technology. A design approach based on the heat transfer modelling, with consideration of the cut-off temperatures, was established. The model was solved using a control-volume methodology with an implicit scheme. Various configurations were investigated, considering a 100-MW power plant with 6 hours of backup capacity. The results indicate that there is a possibility to significantly reduce the capacity cost to about $9/kWht when the internal insulation of the storage tank along with a low-cost ceramic shell and chloride-based salts are used.Keywords
This publication has 40 references indexed in Scilit:
- Application of phase change materials for thermal energy storage in concentrated solar thermal power plants: A review to recent developmentsApplied Energy, 2015
- Numerical and experimental studies on heat transfer characteristics of thermal energy storage system packed with molten salt PCM capsulesApplied Thermal Engineering, 2015
- Analysis of a graphite foam–NaCl latent heat storage system for supercritical CO2 power cycles for concentrated solar powerSolar Energy, 2015
- General volume sizing strategy for thermal storage system using phase change material for concentrated solar thermal power plantApplied Energy, 2015
- Using Encapsulated Phase Change Salts for Concentrated Solar Power PlantEnergy Procedia, 2014
- Cost and performance analysis of concentrating solar power systems with integrated latent thermal energy storageEnergy, 2014
- Encapsulated phase change materials for energy storage – Characterization by calorimetrySolar Energy, 2013
- Thermo-mechanical analysis of ceramic encapsulated phase-change-material (PCM) particlesEnergy & Environmental Science, 2011
- Numerical analysis of the thermal behaviour of a shell-and-tube heat storage unit using phase change materialsApplied Mathematical Modelling, 2009
- Thermal Energy Storage and Phase Change Materials: An OverviewEnergy Sources, Part B: Economics, Planning, and Policy, 2006