Optimization and Tuning of Passive Tuned Mass Damper Embedded in Milling Tool for Chatter Mitigation
Open Access
- 25 December 2020
- journal article
- research article
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 5 (1) , 2
Abstract
Milling tools with a large length–diameter ratio are widely applied in machining structural features with deep depth. However, their high dynamic flexibility gives rise to chatter vibrations, which results in poor surface finish, reduced productivity, and even tool damage. With a passive tuned mass damper (TMD) embedded inside the arbor, a large length–diameter ratio milling tool with chatter-resistance ability was developed. By modeling the milling tool as a continuous beam, the tool-tip frequency response function (FRF) of the milling tool with TMD was derived using receptance coupling substructure analysis (RCSA), and the gyroscopic effect of the rotating tool was incorporated. The TMD parameters were optimized numerically with the consideration of mounting position based on the maximum cutting stability criterion, followed by the simulation of the effectiveness of the optimized and detuned TMD. With the tool-tip FRF obtained, the chatter stability of the milling process was predicted. Tap tests showed that the TMD was able to increase the minimum real part of the FRF by 79.3%. The stability lobe diagram (SLD) was predicted, and the minimum critical depth of cut in milling operations was enhanced from 0.10 to 0.46 mm.Keywords
Funding Information
- National Natural Science Foundation of China (51675032, 91960108, 91748205)
This publication has 30 references indexed in Scilit:
- Suppressing vibrations in milling-trimming process of the plate-like workpiece by optimizing the location of vibration absorberJournal of Materials Processing Technology, 2020
- Chatter avoidance via structural modification of tool-holder geometryInternational Journal of Machine Tools and Manufacture, 2020
- Eddy Current-Based Vibration Suppression for Finish Machining of Assembly Interfaces of Large Aircraft Vertical TailJournal of Manufacturing Science and Engineering, 2019
- Adaptive tuned mass damper with variable mass for chatter avoidanceCIRP Annals, 2017
- Chatter suppression techniques in metal cuttingCIRP Annals, 2016
- Design of self-tuneable mass damper for modular fixturing systemsCIRP Annals, 2016
- A tuned holder for increased boring bar dynamic stiffnessJournal of Manufacturing Processes, 2011
- Optimization of multiple tuned mass dampers to suppress machine tool chatterInternational Journal of Machine Tools and Manufacture, 2010
- Chatter Stability of Metal Cutting and GrindingCIRP Annals, 2004
- Analytical Prediction of Stability Lobes in MillingCIRP Annals, 1995