Comparative Study of Phase Change Material Composites for Thermal Performance of Lab-scale Hollow Steel Energy Pile
Authors:
- Qusi I. AlqawasmehQAQusi I. Alqawasmeh
- Wenbin FeiWFWenbin Fei
- Guillermo NarsilioGNGuillermo Narsilio
- Zhe LiZLZhe Li
Preprint
- 17 August 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Energy piles are a novel and cost-effective alternative to traditional borehole heat exchangers (BHXs) connected to ground source heat pumps (GSHPs), which are used for efficient space heating and cooling. Utilising phase change material (PCM) composites as backfilling material enhances the thermal performance of traditional BHXs and precast hollow concrete energy piles. Beyond steady-state heat exchange, PCM composites also raise the volumetric heat storage capacity of the pile, allowing it to operate as a compact underground thermal energy storage (TES). However, studies on the performance of PCM-filled hollow steel energy piles are limited. This study investigates the thermal performance of various PCM composites backfilling a lab-scale hollow steel energy pile embedded in sand, with temperature sensors monitoring thermal response in the pile and surrounding soil. Various PCM composites are investigated as pile backfilling, namely; i) Paraffin PCM with expanded graphite (CPCM), ii) CPCM with graphite powder, and iii) a wet mixture of CPCM with Kaolin clay. The thermophysical properties of the composites are characterised using differential scanning calorimetry (DSC) and a dual-needle thermal analyser. Results show that a stable CPCM composite without melted paraffin leakage is achieved by adding expanded graphite to paraffin in a mass ratio of 1:9. Furthermore, adding graphite powder to CPCM improves thermal conductivity, but introduces a marginal impact on heat storage, thus a lower recovery speed of the energy pile system. Finally, the increase in clay moisture up to 18% enhances both the thermal conductivity of CPCM and heat storage capacity, leading to a 12% faster thermal recovery speed.Keywords
This publication has 25 references indexed in Scilit:
- A systematic review on the application progress of phase change materials in energy pilesApplied Thermal Engineering, 2025
- Comprehensive study on thermal properties and application of phase change materials in constructionJournal of Building Pathology and Rehabilitation, 2024
- A novel paraffin/graphite PCM backfill for PHC energy pile: Numerical and experimental analysis on thermal performanceApplied Thermal Engineering, 2024
- Improving thermal performance of groups of energy screw piles with phase change materialsApplied Thermal Engineering, 2023
- Review of metallic phase change materials for high heat flux transient thermal management applicationsApplied Energy, 2020
- Smart Ground-Source Borehole Heat Exchanger Backfills: A Numerical Study2018
- Review on solid-solid phase change materials for thermal energy storage: Molecular structure and thermal propertiesApplied Thermal Engineering, 2017
- Preparation and analysis of lightweight wall material with expanded graphite (EG)/paraffin composites for solar energy storageApplied Thermal Engineering, 2017
- Numerical investigation on thermal performance of ground heat exchangers using phase change materials as grout for ground source heat pump systemApplied Thermal Engineering, 2016
- Preparation and thermal energy storage properties of paraffin/expanded graphite composite phase change materialApplied Energy, 2012