A numerical investigation of the use of novel melt processed PET‐hemp fiber composites for thermoforming applications
Authors:
- 15 April 2016
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 56 (9) , 1021-1030
Abstract
The mechanical and structural properties of five formulations of a novel melt processed poly‐ethylene terephthalate (PET)‐hemp fibers composite were determined, followed by a numerical investigation of their thermoformability using the ThermoForm® code. The composites' linear viscoelastic properties were determined by small amplitude oscillatory shear tests and their viscoelastic behavior characterized by the Christensen's model. The forming pressure load required by the numerical analysis was derived from the Redlich–Kwong's real gas equation of state. The air flow's influence on the thickness of the thermoformed part, as well as the stress and the energy required for the process were analyzed. Our observations indicate little influence of the constitutive equations of the investigated formulations on the final thickness distribution of the thermoformed part; moreover, the time and energy required for the process showed no clear variation with the fiber load. POLYM. ENG. SCI. 56:1021–1030, 2016. © 2016 Society of Plastics EngineersKeywords
This publication has 20 references indexed in Scilit:
- Mechanical and structural properties of a novel melt processed PET–hemp composite: Influence of additives and fibers concentrationJournal of Reinforced Plastics and Composites, 2013
- A new hybrid approach using the explicit dynamic finite element method and thermodynamic law for the analysis of the thermoforming and blow molding processes for polymer materialsPolymer Engineering & Science, 2006
- A study of the mechanical properties of short natural-fiber reinforced compositesComposites Part B: Engineering, 2005
- The effect of crosslinking on the properties of polyethylene/wood flour compositesComposites Science and Technology, 2005
- A comparison of compounding processes and wood type for wood fibre—PP compositesComposites Part A: Applied Science and Manufacturing, 2005
- Recycled poly(ethylene terephthalate) chain extension by a reactive extrusion processPolymer Engineering & Science, 2004
- Mechanical properties of wood flake–polyethylene composites. Part I: effects of processing methods and matrix melt flow behaviourComposites Part A: Applied Science and Manufacturing, 2001
- Natural fiber polymer composites: A reviewAdvances in Polymer Technology, 1999
- Short sisal fiber reinforced styrene‐butadiene rubber compositesJournal of Applied Polymer Science, 1995
- On the Thermodynamics of Solutions. V. An Equation of State. Fugacities of Gaseous Solutions.Chemical Reviews, 1949