Effects of styrene–acrylonitrile contents on the properties of ABS/SAN blends for fused deposition modeling
Authors:
- 6 October 2016
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 134 (7)
Abstract
This paper was to assess the effects of styrene–acrylonitrile (SAN) contents on the glass transition temperature (Tg), melt flow index (MFI), and mechanical properties of acrylonitrile–butadiene–styrene (ABS)/SAN blends for fused deposition modeling (FDM) process. The addition of SAN had little effects on Tg but could decrease the MFI and elongation at break while improving the tensile strength and modulus of ABS/SAN blends. For both longitudinal direction and transverse direction FDM printed specimens, the incorporation of SAN improved mechanical properties without sacrificing dimensional stability. This result was mainly attributed to the increasing content of continuous phase (SAN phase) and improvement in adhesion quality. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 44477.Keywords
Funding Information
- Shanghai Leading Academic Discipline Project (B603)
- Program of Introducing Talents of Discipline to Universities (111-2-04)
This publication has 26 references indexed in Scilit:
- Electrical conductivity and thermal properties of acrylonitrile‐butadiene‐styrene filled with multiwall carbon nanotubesPolymer Engineering & Science, 2009
- Morphology and mechanical properties of ABS blends prepared from emulsion‐polymerized PB‐g‐SAN impact modifier with AIBN as initiatorJournal of Applied Polymer Science, 2007
- Effects of the polybutadiene/poly(styrene‐co‐acrylonitrile) ratio in a polybutadiene‐g‐poly(styrene‐co‐acrylonitrile) impact modifier on the morphology and mechanical behavior of acrylonitrile–butadiene–styrene blendsJournal of Applied Polymer Science, 2005
- Effects of polybutadiene-g-SAN impact modifiers on the morphology and mechanical behaviors of ABS blendsEuropean Polymer Journal, 2005
- Influence of acrylonitrile–butadiene–styrene (ABS) morphology and poly(styrene‐co‐acrylonitrile) (SAN) content on fracture behavior of ABS/SAN blendsJournal of Applied Polymer Science, 2004
- Degradation of ABS during repeated processing and accelerated ageingPolymer Degradation and Stability, 2003
- Effects of extrusion conditions on rheological behavior of acrylonitrile–butadiene–styrene terpolymer meltJournal of Applied Polymer Science, 2002
- Melt blends of SAN with SAN‐graft‐polybutadiene (PB)Journal of Applied Polymer Science, 1993
- Toughening of SAN copolymers by an SAN emulsion grafted rubberPolymer, 1990
- Acrylonitrile-butadiene-styrene (ABS) - a reviewComposites, 1973