Numerical algorithm of reinforced concrete lining cracking process for pressure tunnels
- 5 March 2018
- journal article
- research article
- Published by Emerald Publishing in Engineering Computations
- Vol. 35 (1) , 91-107
Abstract
Purpose: The cracking of a reinforced concrete lining has a significant influence on the safety and leakage of pressure tunnels. This study aims to develop, validate and apply a numerical algorithm to simulate the lining cracking process during the water-filling period of pressure tunnels.Design/methodology/approach: Cracks are preset in all lining elements, and the Mohr−Coulomb criterion with a tension cutoff is used in determining whether a preset crack becomes a real crack. The effects of several important factors such as the water pressure on crack surfaces (WPCS) and the heterogeneity of the lining tensile strength are also considered simultaneously.Findings: The crack number and width increase gradually with the increase in internal water pressure. However, when the pressure reaches a threshold value, the increase in crack width becomes ambiguous. After the lining cracks, the lining displacement distribution is discontinuous and steel bar stress is not uniform. The measured stress of the steel bar is greatly determined by the position of the stress gauge. The WPCS has a significant influence on the lining cracking mechanism and should not be neglected.Originality/value: A reliable algorithm for simulating the lining cracking process is presented by which the crack number and width can be determined directly. The numerical results provide an insight into the development law of lining cracks and show that the WPCS significantly affects the cracking mechanism.Keywords
This publication has 17 references indexed in Scilit:
- Norwegian Design Principle for High Pressure Tunnels and Shafts: Its Applicability in the HimalayaHydro Nepal: Journal of Water, Energy and Environment, 2014
- Simplified modeling of cracking in concrete: Application in tunnel liningsEngineering Structures, 2014
- Stability analysis of the slope around flood discharge tunnel under inner water exosmosis at Yangqu hydropower stationComputers and Geotechnics, 2013
- Investigation on the Cause of Damages of a Deep TunnelInternational Journal of Geomechanics, 2012
- Numerical simulation of the load-carrying behavior of RC tunnel structures exposed to fireFinite Elements in Analysis and Design, 2009
- Study on coupled seepage and stress fields in the concrete lining of the underground pipe with high water pressureTunnelling and Underground Space Technology, 2009
- The deformation of overburden soil induced by thrust faulting and its impact on underground tunnelsEngineering Geology, 2007
- Behavior of Pressure Tunnels and Guidelines for Liner DesignJournal of Geotechnical Engineering, 1994
- Design criteria applied for the Lower Pressure Tunnel of the North Fork Stanislaus River Hydroelectric Project in CaliforniaRock Mechanics and Rock Engineering, 1988
- Validity of Cubic Law for fluid flow in a deformable rock fractureWater Resources Research, 1980