Spark plasma sintering of tungsten alloyed with tantalum
Authors:
Open Access
- 10 February 2026
- journal article
- research article
- Published by Springer Nature in Discover Applied Sciences
- Vol. 8 (3)
Abstract
Tungsten is a typical refractory metal and is a promising plasma-facing material for the future fusion reactors. The problem with tungsten is its high brittle-ductile transformation temperature, which limits the range of industrial applications of tungsten. This problem could be tailored by enhancing the extrinsic and intrinsic plasticity of tungsten via processing and alloying, respectively. This study aimed to explore both aspects and investigate how tantalum addition, powder handling, and Spark Plasma Sintering (SPS) conditions affect densification, microstructure, and flexural strength in large 50 mm W–6Ta compacts. The storage and handling of the powders in the air revealed problems with tantalum oxide formation during the sintering that affected the mechanical properties despite the formed tantalum-tungsten solid solution during sintering and the limited grain size refinement.Keywords
Funding Information
- Stockholm University
This publication has 25 references indexed in Scilit:
- Tooling in Spark Plasma Sintering Technology: Design, Optimization, and ApplicationAdvanced Engineering Materials, 2024
- Effects of tantalum concentration on the microstructures and mechanical properties of tungsten-tantalum alloysFusion Engineering and Design, 2017
- In situ oxide dispersion strengthened tungsten alloys with high compressive strength and high strain-to-failureActa Materialia, 2017
- Consolidation of W–Ta composites: Hot isostatic pressing and spark and pulse plasma sinteringFusion Engineering and Design, 2015
- Fabrication and characterization of pure tungsten using the hot-shock consolidationInternational Journal of Refractory Metals and Hard Materials, 2014
- Kinetics of Densification and Grain Growth of Pure Tungsten During Spark Plasma SinteringMetallurgical and Materials Transactions B, 2012
- Microwave sintering of tungstenInternational Journal of Refractory Metals and Hard Materials, 2009
- Is Weibull distribution the most appropriate statistical strength distribution for brittle materials?Ceramics International, 2009
- Mechanical behavior and dynamic failure of high-strength ultrafine grained tungsten under uniaxial compressionActa Materialia, 2005
- Deoxidation of high-melting-point metals and alloys in vacuumMetallurgical Transactions B, 1982