Optimization of Explosive Atmospheres Hazardous Area Classification in Pharmaceutical Liquid Manufacturing Using a Semi‐Empirical Ventilation‐Based Approach
- 3 August 2026
- journal article
- research article
- Published by Wiley in Process Safety Progress
Abstract
Explosive ATmospheres (ATEX) zoning in process industries is commonly based on standards such as International Electrotechnical Commission (IEC) 60079‐10‐1. However, when ventilation performance is not quantitatively evaluated, their practical application may result in conservative estimations of hazardous volumes, particularly in highly ventilated environments. A semi‐empirical methodology integrating evaporation rate modeling and ventilation performance is proposed to quantify vapor generation and determine the minimum ventilation rate required to maintain concentrations below 25% of the lower explosive limit. The approach is applied to a pharmaceutical facility using ethanol with an air exchange rate of 25 vol h −1 . The vapor generation rate is estimated at 2.01 m 3 h −1 , leading to a critical ventilation rate of about 244 m 3 h −1 . For the studied configuration (170 m 3 ), the actual ventilation rate exceeds this threshold, with a safety factor (Qreal/Qmin) of approximately 17.4. The results indicate that large‐scale vapor accumulation is unlikely under the studied ventilation conditions, although localized transient flammable atmospheres may still occur near potential release sources. The results show that explicitly accounting for ventilation performance allows a reduction in the conservatism of ATEX zoning while maintaining an adequate safety factor. The proposed methodology provides a practical framework for risk‐informed hazardous area classification in ventilated industrial environments.Keywords
This publication has 15 references indexed in Scilit:
- Very lean hydrogen vapor cloud explosion testingProcess Safety Progress, 2023
- Reaction calorimetry: Main types, simple theory, and application for kinetic study—A reviewProcess Safety Progress, 2023
- Emerging challenges for the safe transportation of lithium batteriesProcess Safety Progress, 2022
- Pool evaporation: Experimental tests at medium-scale with gasolineJournal of Loss Prevention in the Process Industries, 2020
- How can we improve process hazard identification? What can accident investigation methods contribute and what other recent developments? A brief historical survey and a sketch of how to advanceJournal of Loss Prevention in the Process Industries, 2018
- An experimental investigation of evaporation rates for different volatile organic compoundsProcess Safety Progress, 2013
- A scheme for the classification of explosions in the chemical process industryJournal of Hazardous Materials, 2010
- Possibilities and Limits of Application of Electrical Resistance Tomography in Hydrodynamics of Bubble ColumnsThe Canadian Journal of Chemical Engineering, 2008
- A review of dispersion modelling and its application to the dispersion of particles: An overview of different dispersion models availableAtmospheric Environment, 2006
- Threshold values for domino effects caused by blast wave interaction with process equipmentJournal of Loss Prevention in the Process Industries, 2004