Application of taguchi method coupled with GRA for optimization of drilling process parameters
Authors:
- Khushboo SharmaKSKhushboo Sharma
- Gaurav KumarGKGaurav Kumar
- Mukesh KumarMKMukesh Kumar
Open Access
- 1 May 2021
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1149 (1)
Abstract
In present article, an experimental study is performed for optimizing the machining parameters of AA6082. The control factors like cutting fluid (present - absent), speed (520 rpm – 420 rpm), feed rate (120 mm/min – 80 mm/min) and hole-depth (16 mm – 24 mm) are taken into account to optimize the material removal rate and surface roughness. Taguchi’s L18 orthogonal array was chosen for experimental trials. Grey relational analysis is employed to find, which process parameters affect the surface finish most with their percentage contribution individually. The results of ANOVA show that among all the control factors, feed rate (74.82%) is the highest contributing factor followed by cutting fluid (11.42%). This study also shows that by using the taguchi approach, the surface finish of the machining process can be upgraded.Keywords
This publication has 11 references indexed in Scilit:
- A review: drilling performance and hole quality of aluminium alloys for aerospace applicationsJournal of Materials Research and Technology, 2020
- Multi Performance Optimizationof Shoulder Milling Process Parameters of AA6063 T6 Aluminium Alloy by Taguchi Based GRAInternational Journal of Innovative Technology and Exploring Engineering, 2019
- Optimization Parameters for Energy Efficiency in End millingProcedia CIRP, 2018
- Optimization and Prediction of Parameters in Face Milling of Al-6061 Using Taguchi and ANN ApproachProcedia Engineering, 2014
- Optimization of Deep Drilling Process Parameters of AISI 321 Steel Using Taguchi MethodProcedia Materials Science, 2014
- Optimization of Cutting Parameters for Cutting Force in Shoulder Milling of Al7075-T6 Using Response Surface Methodology and Genetic AlgorithmProcedia Engineering, 2013
- Application of Taguchi Method for Surface Roughness and Roundness Error in Drilling of AISI 316 Stainless SteelStrojniški vestnik - Journal of Mechanical Engineering, 2012
- Prediction of Milling Cutting Force Coefficients for Aluminum 6082-T4Procedia CIRP, 2012
- Grey relational analysis coupled with principal component analysis for optimisation design of the process parameters in in-feed centreless cylindrical grindingThe International Journal of Advanced Manufacturing Technology, 2009
- Surface Roughness Optimization in a Drilling Operation Using the Taguchi Design MethodMaterials and Manufacturing Processes, 2009