The Effect of an Ag Nanofilm on Low-Temperature Cu/Ag-Ag/Cu Chip Bonding in Air
Open Access
- 12 October 2021
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 11 (20) , 9444
Abstract
Low-temperature Cu-Cu bonding technology plays a key role in high-density and high-performance 3D interconnects. Despite the advantages of good electrical and thermal conductivity and the potential for fine pitch patterns, Cu bonding is vulnerable to oxidation and the high temperature of the bonding process. In this study, chip-level Cu bonding using an Ag nanofilm at 150 °C and 180 °C was studied in air, and the effect of the Ag nanofilm was investigated. A 15-nm Ag nanofilm prevented Cu oxidation prior to the Cu bonding process in air. In the bonding process, Cu diffused rapidly to the bonding interface and pure Cu-Cu bonding occurred. However, some Ag was observed at the bonding interface due to the short bonding time of 30 min in the absence of annealing. The shear strength of the Cu/Ag-Ag/Cu bonding interface was measured to be about 23.27 MPa, with some Ag remaining at the interface. This study demonstrated the good bonding quality of Cu bonding using an Ag nanofilm at 150 °C.Keywords
Funding Information
- Korea Institute for Advancement of Technology (P0008458)
- National Research Foundation of Korea (NRF-2018R1A2B6003921)
This publication has 14 references indexed in Scilit:
- Ar/N2 Plasma Induced Metastable CuxNy for Cu-Cu Direct BondingECS Transactions, 2020
- Two-Step Plasma Treatment on Copper Surface for Low-Temperature Cu Thermo-Compression BondingIEEE Transactions on Components, Packaging and Manufacturing Technology, 2019
- Interface and Reliability Analysis of Au-Passivated Cu–Cu Fine-Pitch Thermocompression Bonding for 3-D IC ApplicationsIEEE Transactions on Components, Packaging and Manufacturing Technology, 2019
- Thermal-stable void-free interface morphology and bonding mechanism of low-temperature Cu-Cu bonding using Ag nanostructure as intermediateJournal of Alloys and Compounds, 2018
- Low Temperature Cu–Cu Bonding Technology in Three-Dimensional Integration: An Extensive ReviewJournal of Electronic Packaging, 2018
- Ultra-thin Ti passivation mediated breakthrough in high quality Cu-Cu bonding at low temperature and pressureMaterials Letters, 2016
- Low Temperature Cu-Cu Bonding Using Ag Nanostructure for 3D IntegrationECS Solid State Letters, 2015
- Novel Cu-to-Cu Bonding With Ti Passivation at 180$^{\circ}{\rm C}$ in 3-D IntegrationIEEE Electron Device Letters, 2013
- Low temperature CuCu thermo-compression bonding with temporary passivation of self-assembled monolayer and its bond strength enhancementMicroelectronics Reliability, 2012
- Structure and diffusion processes in laminated composites of a Cu–Ti systemRussian Physics Journal, 2009