Brazing Sapphire/Sapphire and Sapphire/Copper Sandwich Joints Using Sn-Ag-Ti Active Solder Alloy
Authors:
- 13 April 2018
- journal article
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 273, 187-193
Abstract
In this paper, a preliminary study in the wetting behavior and interface reaction between active Sn-Ag-4Ti solder alloy and C-plane sapphire was given. An in-situ observation of Sn-Ag-4Ti alloy on C-plane sapphire revealed a decrease in contact angles at temperature close to 550°C. Moreover, sapphire/sapphire and sapphire/copper sandwich joints were brazed using Sn-3.5Ag-4Ti alloy at 500 oC, 550°C and 600 °C to investigate the microstructure evolution and interface reaction. Microstructure characterization and element analysis indicated that the temperature affected the diffusion of active Ti element by modifying the formation of Sn-Ti intermetallics compounds in Sn-Ag-Ti solder alloy. The absorption of Ti together with the release of Al from sapphire suggested the interface reaction between Sn-Ag-Ti alloy and sapphire was triggered at 550°C.Keywords
This publication has 11 references indexed in Scilit:
- Ceramic protection plates brazed to aluminum brake discsCeramics International, 2016
- Interfacial reactions between sapphire and Ag–Cu–Ti-based active braze alloysActa Materialia, 2016
- Brazing copper and alumina metallized with Ti-containing Sn0.3Ag0.7Cu metal powderMaterials & Design, 2015
- Microstructural evolution and characterisation of interfacial phases in Al2O3/Ag–Cu–Ti/Al2O3 braze jointsActa Materialia, 2015
- Effects of titanium on active bonding between Sn3.5Ag4Ti(Ce,Ga) alloy filler and aluminaJournal of Materials Science: Materials in Electronics, 2015
- Microstructural characterization and mechanical property of active soldering anodized 6061 Al alloy using Sn–3.5Ag–xTi active soldersMaterials Characterization, 2012
- Shear strength and wettability of active Sn3.5Ag4Ti(Ce,Ga) solder on Al2O3 ceramicsMaterials & Design (1980-2015), 2011
- Brazing copper to alumina using reactive CuAgTi alloysActa Materialia, 2010
- Low Temperature Bonding of Alumina/Alumina and Alumina/Copper in Air Using Sn3.5Ag4Ti(Ce,Ga) FillerJournal of Electronic Materials, 2007
- Role of titanium on the reactive spreading of lead-free solders on aluminaJournal of Materials Research, 2006