Development of Creep–Fatigue Evaluation Method for 316FR Stainless Steel
Authors:
- 1 August 2015
- journal article
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 137 (4) , 041407
Abstract
In the design of fast reactor plants, the most important failure mode to be prevented is creep–fatigue damage at elevated temperatures. 316FR stainless steel is a candidate material for the reactor vessel and internal structures of such plants. The development of a procedure for evaluating creep–fatigue life is essential. The method for evaluating creep–fatigue life implemented in the Japan Society of Mechanical Engineers code is based on the time fraction rule for evaluating creep damage. Equations such as the fatigue curve, dynamic stress–strain curve, creep rupture curve, and creep strain curve are necessary for calculating creep–fatigue life. These equations are provided in this paper and the predicted creep–fatigue life for 316FR stainless steel is compared with experimental data. For the evaluation of creep–fatigue life, the longest time to failure is about 100,000 h. The creep–fatigue life is predicted to an accuracy that is within a factor of 2 even in the case with the longest time to failure. Furthermore, the proposed method is compared with the ductility exhaustion method to investigate whether the proposed method gives conservative predictions. Finally, a procedure based on the time fraction rule for the evaluation of creep–fatigue life is proposed for 316FR stainless steel.Keywords
This publication has 9 references indexed in Scilit:
- Development of 2012 Edition of JSME Code for Design and Construction of Fast Reactors: (2) Development of the Material Strength Standard of 316FR Stainless Steel2013
- Systematic Evaluation of Creep-Fatigue Life Prediction Methods for Various Alloys2009
- Evaluation of the creep–fatigue damage mechanism of Type 316L and Type 316LN stainless steelInternational Journal of Pressure Vessels and Piping, 2008
- Study on creep-fatigue life prediction methods for low-carbon nitrogen-controlled 316 stainless steel (316FR)Nuclear Engineering and Design, 2008
- Long-term creep rupture behavior of smoothed and notched bar specimens of low-carbon nitrogen-controlled 316 stainless steel (316FR) and their evaluationNuclear Engineering and Design, 2008
- Creep-fatigue behaviour of an AISI stainless steel at 550°CNuclear Engineering and Design, 2004
- Effects of Carbon, Molybdenum, and Phosphorus Contents on Creep Rupture Properties of Low Carbon Medium Nitrogen Type 316 Stainless SteelsJournal of the Japan Institute of Metals and Materials, 2000
- Effect of Grain Size on High-Temperature Strength of Fast Reactor Spec. SUS316Journal of the Society of Materials Science, Japan, 1997
- Creep-fatigue evaluation of normalized and tempered modified 9Cr1MoNuclear Engineering and Design, 1994