OPTIMAL PROFILE FOR A FIN OF CONSTANT CROSS SECTION WITH MODELATION OF THE THERMOPHYSICAL PROPERTIES
Open Access
- 11 March 2024
- journal article
- research article
- Published by EdiUNS - Editorial de la Universidad Nacional del Sur in Latin American Applied Research - An international journal
- Vol. 54 (2) , 293-298
Abstract
The dependence of the temperature and composition on thermal conductivity of steel, and its influence in the optimal profile for a fin of constant cross section to be used in air cooled condenser is presented. In Air Cooled Condensers (ACC), air is used as refrigerant, which forces the need for fins to improve the heat transfer process leading to appreciable increments in the costs of the installation. Therefore, developing better fins profile will allow optimizing the operation, maximizing the heat transfer and minimizing the manufacturing cost of the fins. To this objective, in the present paper, three geometric parameters, thickness, height and surface of heat transfer of the fin, this parameters influence directly the optimal obtained profile for conditions of maximum heat flux and optimal Biot number. The study was accomplished for fins of constant cross section. In a future work, fins of variable cross sections will be considered.Keywords
All Related Versions
This publication has 15 references indexed in Scilit:
- Experimental study on influence of the temperature and composition in the steels thermo physical properties for heat transfer applicationsJournal of Thermal Analysis and Calorimetry, 2022
- Investigation of flow distribution and effect of aspect ratio on critical heat flux in multiple parallel microchannel flow boilingHeat and Mass Transfer, 2020
- Is Portal Inflow Modulation Always Necessary for Successful Utilization of Small Volume Living Donor Liver Grafts?Liver Transplantation, 2019
- Direct and inverse approaches for analysis and optimization of fins under sensible and latent heat loadInternational Journal of Heat and Mass Transfer, 2018
- Effects of geometric structures of air deflectors on thermo-flow performances of air-cooled condenserInternational Journal of Heat and Mass Transfer, 2018
- A correlation for heat transfer and flow friction characteristics of the offset strip fin heat exchangerInternational Journal of Heat and Mass Transfer, 2017
- Experimental study of the transitional flow regime in coiled tubes by the estimation of local convective heat transfer coefficientInternational Journal of Heat and Mass Transfer, 2017
- Constructal optimization of longitudinal and latitudinal rectangular fins used for cooling a plate under free convection by the intersection of asymptotes methodInternational Journal of Heat and Mass Transfer, 2017
- A comparison of thermal-hydraulic performance of various fin patterns using 3D CFD simulationsInternational Journal of Heat and Mass Transfer, 2017
- Heat-transfer enhancement in fin-and-tube heat exchanger with improved fin designApplied Thermal Engineering, 2009