A Set of Multilevel Modular Medium-Voltage High Power Converters for 10-MW Wind Turbines
Author:
- 31 January 2014
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Sustainable Energy
- Vol. 5 (2) , 524-534
Abstract
Medium-voltage power conversion is generally favored for future large wind turbines, e.g., 10 MW, in terms of higher power density, reduced current level, associated losses, and cost of power cables, switchgears, etc. This paper has summarized a fundamental rule to construct multilevel modular high power converters for large wind turbine power conversion. Based on that, three potential multilevel modular high power converter topologies are derived and compared. The topology with a 10-kV generator, a modular power converter, and a multi-winding step-up transformer have been specifically investigated. The large dc-link capacitor (not reliable, high cost, large volume) required in the converter is identified as the key limitation of the system used for wind power conversion. The paper proposes to compensate the ripple power by the grid-side inverter of the multilevel modular converter, thus reducing the dc-link capacitor requirement. The paper has validated the effectiveness of proportional-integral-resonant controller for this purpose. Further, the thermal impact of the proposed ripple power compensation scheme on the converter device junction temperature and the transformer secondary windings has been analytically derived. The paper has also analytically revealed that the proposed ripple power compensation scheme will not affect the grid-side power quality, although there are low-frequency harmonics in the transformer secondary windings. Simulation results with a 10-MW, 10-kV system have validated the proposed converter topology and control strategy with reduced dc-link voltage ripple.Keywords
This publication has 25 references indexed in Scilit:
- Power Electronics Converters for Wind Turbine SystemsIEEE Transactions on Industry Applications, 2011
- Overview of Multi-MW Wind Turbines and Wind ParksIEEE Transactions on Industrial Electronics, 2011
- Uniflex-PM – a Key-Enabling Technology for Future European Electricity NetworksEPE Journal, 2009
- Multilevel Voltage-Source-Converter Topologies for Industrial Medium-Voltage DrivesIEEE Transactions on Industrial Electronics, 2007
- A Bidirectional Isolated DC–DC Converter as a Core Circuit of the Next-Generation Medium-Voltage Power Conversion SystemIEEE Transactions on Power Electronics, 2007
- Proportional-resonant controllers and filters for grid-connected voltage-source convertersIEE Proceedings - Electric Power Applications, 2006
- Control of Permanent-Magnet Generators Applied to Variable-Speed Wind-Energy Systems Connected to the GridIEEE Transactions on Energy Conversion, 2006
- Power Loss-Oriented Evaluation of High Voltage IGBTs and Multilevel Converters in Transformerless Traction ApplicationsIEEE Transactions on Power Electronics, 2005
- Regenerative Medium-Voltage AC Drive Based on a Multicell Arrangement With Reduced Energy Storage RequirementsIEEE Transactions on Industrial Electronics, 2005
- Sensorless Vector Control of Induction Machines for Variable-Speed Wind Energy ApplicationsIEEE Transactions on Energy Conversion, 2004