Preliminary Experimental Research on the Influence of Counterbalance Valves on the Operation of a Heavy Hydraulic Manipulator during Long-Range Straight-Line Movement
Open Access
Abstract
The effective use of robotic manipulators is particularly important when carrying out hazardous tasks. Often, for this type of mission, manipulators equipped with a hydraulic drive system are used, and their work results primarily from the implementation of precise movements through their effectors. In heavy manipulators, limiting the uncontrolled movement resulting from high inertia and relatively low stiffness has an impact on the improvement of the control precision. Therefore, the paper presents experimental studies that allow the assessment of the impact of the use of counterbalance valves on the precision and dynamics of a manipulator with a hydrostatic drive system. The tests were carried out for a wide range of effector velocities along a horizontal trajectory, on the basis of which, it was found that it was possible to improve the precision and dynamics of the work of such manipulators due to the precision of the trajectory and pressures in the drive system.Keywords
Funding Information
- Military University of Technology (22-757/2022)
This publication has 33 references indexed in Scilit:
- Control of Upper-Limb Power-Assist Exoskeleton Using a Human-Robot Interface Based on Motion Intention RecognitionIEEE Transactions on Automation Science and Engineering, 2015
- A throttle-less single rod hydraulic cylinder positioning system for switching loadsCase Studies in Mechanical Systems and Signal Processing, 2015
- A Vision-based Wireless Charging System for Robot TrophallaxisInternational Journal of Advanced Robotic Systems, 2015
- A Design Solution for Efficient and Compact Electro-hydraulic ActuatorsProcedia Engineering, 2015
- Energetic and dynamic impact of counterbalance valves in fluid power machinesEnergy Conversion and Management, 2013
- Preliminary Simulations of High Mobility IED Resistance Suspension with Casting ArmsSolid State Phenomena, 2013
- Empirical study to investigate the range of force feedback necessary for best operator performance in a haptic controlled excavator interfaceInternational Journal of Industrial Ergonomics, 2013
- A Study on the Large-Scale Bilateral ManipulatorTRANSACTIONS OF THE JAPAN FLUID POWER SYSTEM SOCIETY, 2013
- Development of an intuitive user interface for a hydraulic backhoeAutomation in Construction, 2010
- Excavator tele-operation system using a human armAutomation in Construction, 2009